Ad
related to: characteristics of a bolt pattern indicator
Search results
Results From The WOW.Com Content Network
A bolt circle with four wheel nuts on an Acura. The mounting pattern of most car rims are described using bolt patterns, and this pattern is one of many factors which determine whether a rim will fit a given car. Here, the bolt circle indicates the number of wheel nuts and associated hub bolts (or alternatively just wheel bolts). [5] [6]
bolt circle: BCD or B.C.D. bolt circle diameter: BHC bolt hole circle Same definition as the bolt circle diameter BHCS: button head cap screw: Like an SHCS but with a button head. BHN: Brinell hardness number: BoM or BOM: bill of materials: Also called a list of materials (LM or L/M). Overlaps a lot in concept with a parts list (PL or P/L ...
A bolt is an externally helical threaded fastener capable of being tightened or released by a twisting force to a matching nut. The bolt has an external male thread ...
DTIs within the RCSC specification section 8.2.4 are described thus: "ASTM F959 direct tension indicators are recognized in this Specification as a bolt-tension-indicating device. Direct tension indicators are hardened washer shaped devices incorporating small arch-like protrusions on the bearing surface that are designed to deform in a ...
Loose Wheel Nut Indicators – Proper Torque Visual Indicator Wheel nut indicators on a truck showing all nuts are as they were left. A loose wheel nut indicator is a measuring tool that warns of loose wheel nuts, which is the most common cause of wheels on vehicles falling off. [1]
The minor diameter is the lower extreme diameter of the thread. Major diameter minus minor diameter, divided by two, equals the height of the thread. The minor diameter of a nut is its inside diameter. The minor diameter of a bolt can be measured with go/no-go gauges or, directly, with an optical comparator.
Measuring the screw extension directly allows the clamping force to be very accurately calculated. This can be achieved using a dial test indicator, reading deflection at the fastener tail, using a strain gauge, or ultrasonic length measurement. Bolt preload can also be controlled by torquing the bolt to the point of yielding.
The length of a machine screw or bolt is indicated by an × and the length expressed in millimetres (e.g. M8-1.25×30 or M8×30). [citation needed] Tolerance classes defined in ISO 965-1 can be appended to these designations, if required (e.g. M500– 6g in external threads). External threads are designated by lowercase letter, g or h.