Search results
Results From The WOW.Com Content Network
Typical POST screen (AMI BIOS) Typical UEFI-compliant BIOS POST screen (Phoenix Technologies BIOS) Summary screen after POST and before booting an operating system (AMI BIOS) A power-on self-test ( POST ) is a process performed by firmware or software routines immediately after a computer or other digital electronic device is powered on.
Flashrom is a software utility published under an open source license that can detect, read, verify, erase, or write EEPROMs using interfaces such as the Low Pin Count (LPC), FWH, parallel, and Serial Peripheral Interface (SPI). It can be used to flash firmware images such as BIOS or coreboot, or to backup existing firmware.
In computing, the System Management BIOS (SMBIOS) specification defines data structures (and access methods) that can be used to read management information produced by the BIOS of a computer. [1] This eliminates the need for the operating system to probe hardware directly to discover what devices are present in the computer.
Advanced Configuration and Power Interface (ACPI) is an open standard that operating systems can use to discover and configure computer hardware components, to perform power management (e.g. putting unused hardware components to sleep), auto configuration (e.g. Plug and Play and hot swapping), and status monitoring.
Advanced power management (APM) is a technical standard for power management developed by Intel and Microsoft and released in 1992 [1] which enables an operating system running an IBM-compatible personal computer to work with the BIOS (part of the computer's firmware) to achieve power management.
Prior to the development and ubiquitous adoption of the Plug and Play BIOS standard, an add-on device such as a hard disk controller or a network adapter card (NIC) was generally required to include an option ROM in order to be bootable, as the motherboard BIOS did not include any support for the device and so could not incorporate it into the BIOS's boot protocol.
e820 is shorthand for the facility by which the BIOS of an x86-based computer system reports the memory map to the operating system or boot loader. [1] It is accessed via the int 15h call, by setting the AX register to value E820 in hexadecimal. It reports which memory address ranges are usable and which are reserved for use by the BIOS. [2]
For this reason, later BIOS implementations may use a small portion of BIOS flash ROM as NVRAM, to store setup data. [7] Today's UEFI motherboards use NVRAM to store configuration data (NVRAM is a portion of the UEFI flash ROM), but by many OEMs' design, the UEFI settings are still lost if the CMOS battery fails. [8] [9]