Search results
Results From The WOW.Com Content Network
In telecommunications, insertion loss is the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB). If the power transmitted to the load before insertion is P T and the power received by the load after insertion is P R, then the insertion loss in decibels ...
In the context of S-parameters, scattering refers to the way in which the traveling currents and voltages in a transmission line are affected when they meet a discontinuity caused by the insertion of a network into the transmission line. This is equivalent to the wave meeting an impedance differing from the line's characteristic impedance.
Versions of the transmission-line equation may be similarly derived for the admittance loss free case and for the impedance and admittance lossy cases. The Smith chart graphical equivalent of using the transmission-line equation is to normalise Z L , {\displaystyle \,Z_{\mathsf {L}}\,,} to plot the resulting point on a Z Smith chart and to draw ...
The input impedance of an infinite line is equal to the characteristic impedance since the transmitted wave is never reflected back from the end. Equivalently: The characteristic impedance of a line is that impedance which, when terminating an arbitrary length of line at its output, produces an input impedance of equal value. This is so because ...
A time-domain reflectometer; an instrument used to locate the position of faults on lines from the time taken for a reflected wave to return from the discontinuity.. A signal travelling along an electrical transmission line will be partly, or wholly, reflected back in the opposite direction when the travelling signal encounters a discontinuity in the characteristic impedance of the line, or if ...
Equivalent circuit of an unbalanced transmission line (such as coaxial cable) where: 2/Z o is the trans-admittance of VCCS (Voltage Controlled Current Source), x is the length of transmission line, Z(s) ≡ Z o (s) is the characteristic impedance, T(s) is the propagation function, γ(s) is the propagation "constant", s ≡ j ω, and j 2 ≡ −1.
L networks for narrowband matching a source or load impedance Z to a transmission line with characteristic impedance Z 0. X and B may each be either positive (inductor) or negative (capacitor). If Z/Z 0 is inside the 1+jx circle on the Smith chart (i.e. if Re(Z/Z 0)>1), network (a) can be used; otherwise network (b) can be used. [2]
For all ports the voltages may be defined in terms of the Z-parameter matrix and the currents by the following matrix equation: = where Z is an N × N matrix the elements of which can be indexed using conventional matrix notation. In general the elements of the Z-parameter matrix are complex numbers and functions of frequency.