Search results
Results From The WOW.Com Content Network
A furnace needs no less than two stoves, but may have three. One of the stoves is 'on gas', receiving hot gases from the furnace top and heating the checkerwork inside, whilst the other is 'on blast', receiving cold air from the blowers, heating it and passing it to the blast furnace.
Jewelers and glassblowers engaged in lampwork have used the blowpipe since ancient times, with the blast being powered by the user's lungs. For small work, a mouth-blown blowpipe may be used with a candle flame or an alcohol lamp, with established techniques for applying oxidizing and reducing flames to the workpiece or specimen.
In most cases a clone is made in part by studying and reverse engineering the original executable, but occasionally, as was the case with some of the engines in ScummVM, the original developers have helped the projects by supplying the original source code—those are so-called source ports.
For example, a blast furnace may have several "stoves" or "checkers" full of refractory fire brick. The hot gas from the furnace is ducted through the brickwork for some interval, say one hour, until the brick reaches a high temperature. Valves then operate and switch the cold intake air through the brick, recovering the heat for use in the ...
Blast furnaces used in the ISP have a more intense operation than standard lead blast furnaces, with higher air blast rates per m 2 of hearth area and a higher coke consumption. [ 79 ] Zinc production with the ISP is more expensive than with electrolytic zinc plants, so several smelters operating this technology have closed in recent years. [ 80 ]
Hot blast furnace: note the flow of air from the stove in the background to the two blast furnaces, and hot air from the foreground furnace being drawn off to heat the stove. Hot blast refers to the preheating of air blown into a blast furnace or other metallurgical process. As this considerably reduced the fuel consumed, hot blast was one of ...
This requires gas-tight seals at either end of the kiln. The exhaust gas may go to waste, or may enter a preheater, which further exchanges heat with the entering feed. The gases must be drawn through the kiln, and the preheater if fitted, by a fan situated at the exhaust end.
For blast furnaces, direct reduction corresponds to the reduction of oxides by the carbon in the coke. However, in practice, direct reduction only plays a significant role in the final stage of iron reduction in a blast furnace, by helping to reduce wustite (FeO) to iron. In this case, the chemical reaction can be trivially described as follows ...