Ads
related to: adding an intercooler to engine oil tank
Search results
Results From The WOW.Com Content Network
Front-mounted air-to-air intercooler Top-mounted air-to-liquid intercooler (the silver cuboid-shaped part) on a BMW S55 turbocharged engine. An intercooler is a heat exchanger used to cool a gas after compression. [1] Often found in turbocharged engines, intercoolers are also used in air compressors, air conditioners, refrigeration and gas ...
Some engines have an oil cooler, a separate small radiator to cool the engine oil. Cars with an automatic transmission often have extra connections to the radiator, allowing the transmission fluid to transfer its heat to the coolant in the radiator. These may be either oil-air radiators, as for a smaller version of the main radiator.
Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. The hot engine transfers heat to the oil which then usually passes through a heat-exchanger, typically a type of radiator known as an oil cooler. The cooled oil flows back into the hot object to cool it continuously.
The viscosity of oil can be ten times greater than water, increasing the energy required to pump oil for cooling, and reducing the net power output of the engine. Comparing air and water, air has vastly lower heat capacity per gram and per volume (4000) and less than a tenth the conductivity, but also much lower viscosity (about 200 times lower ...
A timing chest or valve chest is a compartment on an internal or external combustion engine (e.g. gasoline or steam engine) which provides access to the tappets and valves. The chest is fitted with an inspection cover sealed with a gasket .
The oil pump forces the motor oil through the passages in the engine to properly distribute oil to different engine components. In a common oiling system, oil is drawn out of the oil sump (oil pan, in US English) through a wire mesh strainer that removes some of the larger pieces of debris from the oil.