Search results
Results From The WOW.Com Content Network
For a line with a maximum speed of 60 km/h (37 mph), buffer-and-chain couplers increase the minimum radius to around 150 m (164 yd; 492 ft). As narrow-gauge railways , tramways , and rapid transit systems normally do not interchange with mainline railways, instances of these types of railway in Europe often use bufferless central couplers and ...
The centre of the buffer on European railway vehicles must be between 940 and 1,065 mm above the top of rail. Spain was an exception for a long time. A buffer separation of 1,950 mm was specified there because of the force transmitted to the longitudinal beams of the wagons, which are further apart due to their broad gauge railways.
Narrow gauge flat wagons, 750 mm (2 ft 5 + 1 ⁄ 2 in).Note the single buffer with a hook on the right side and a chain on the other. On some narrow-gauge lines in Europe, and on the Paris Metro, a simplified version of the loose-coupler is used, consisting of a single central buffer with a chain underneath.
The link-and-pin coupler consisted of a tube-like body that received an oblong link. During coupling, a rail worker had to stand between the cars as they came together and guide the link into the coupler pocket. Once the cars were joined, the employee inserted a pin into a hole a few inches from the end of the tube to hold the link in place.
Increasing the structure gauge for a larger loading gauge can involve substantial work. The UK's Midland Main Line being upgraded in 2014. In narrow curves, long cars like this 26.4 m (86 ft 7 in) long express train car protrude further into the gauge than on a straight track.
A standard chord length is used: in the UK this is conventionally 30 metres, or sometimes 20 metres. Half chords, i.e. 15 metre or 10 metre intervals, are marked on the datum rail using chalk. The string, which is one full chord long, is then held taut with one end on two marks at each end of a chord, and the offset at the half chord mark measured.
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
The General Code of Operating Rules (GCOR) is a set of operating rules for railroads in the United States.The GCOR is used by Class I railroads west of Chicago, most of the Class II railroads, and many Short-line railroads.