Search results
Results From The WOW.Com Content Network
C-stand – Originally known as a century-stand, it is designed to take up very little space and is generally made up of four parts, including the base, a vertical leg with multiple stands, a gobo head and a gobo arm. One of the most common pieces of equipment on a film set, it can hold a variety of reflectors, lights, show cards or boom ...
The camera is mounted to the dolly and the camera operator and focus puller or camera assistant usually ride on the dolly to push the dolly back and forth. The camera dolly is generally used to produce images which involve moving the camera toward or away from a subject while a take is being recorded, a technique known as a "dolly shot".
Hardware and software ("firmware"), built into the camera, measures luminance of the subject and automatically sets shutter speed, lens aperture or sensitivity; this also allows the camera to set the aperture for manual lenses fixed with an AE chip. [4] AE-L or AEL: Automatic exposure lock. Technology for holding an exposure setting from one ...
A key component was a single camera-recorder unit, eliminating a cable between the camera and recorder and increasing the camera operator's freedom. The Betacam used the same cassette format (0.5 inches or 1.3 centimetres tape) as the Betamax, but with a different, incompatible recording format. It became standard equipment for broadcast news. [4]
C-Stand - Callier effect - Cameo lighting - Camera boom - Camera crane - Camera dolly - Clap or 'Film Clap' D ... List of motion picture production equipment.
Motion control camera dolly with Canon DSLR camera. Motion control photography is a technique used in still and motion photography that enables precise control of, and optionally also allows repetition of, camera movements. It can be used to facilitate special effects photography.
In cinematography, a jib is any boom device used to mount a camera on one end, and a counterweight with camera controls on the other. [1] In principle, it operates like a see-saw, with the balance point located closer to the counterweight, which allows the end of the arm with the camera to move through an extended arc. Typically a jib permits ...
A camera stabilizer, or camera-stabilizing mount, is a device designed to hold a camera in a manner that prevents or compensates for unwanted camera movement, such as "camera shake". For small hand-held cameras , a harness or contoured frame steadies the camera against the photographer's body.