Ads
related to: when to check transmission fluid level
Search results
Results From The WOW.Com Content Network
The procedure for checking a transmission's fluid level depends largely on what you drive. Here are the most common ways to do it. How to check your car's transmission fluid
They have sealed transmission fluid level check plugs instead. By removing the traditional dipstick, the transmission manufacturer has also removed a potential entry point for oxygen; this reduces the potential for fluid oxidation. A sealed transmission will typically have a longer transmission fluid life than a non-sealed transmission.
This was the world's first automatic transmission fluid, designed for the world's first mass-produced automatic transmission. [2] This fluid had cold-weather performance problems, which led to the need for an improved fluid, the Type "A" fluid, in 1949. The Hydra-Matic drive fluid was only available at GM dealerships.
The transmission fluid is checked from underneath the vehicle while running and the transmission in park. This must be completed before the transmission fully warms up (35-38°C). Once running, the drain plug on the bottom of the transmission oil pan is removed with a 5mm allen wrench. Some fluid will drip out whether oil level is full or low.
Transmission experts recommend regular fluid changes for severe driving condition, every 80,000 km (50,000 mi). Specific fluid must be used. If incorrect fluid is used it could result in improper operation and lead to transmission damage. Aisin recommends to follow the scheduled maintenance. A badly done oil change can destroy the transmission.
Fluid type DEXRON High Performance ATF Fluid capacity 10.8 L (11.4 US qt) [a] 10.3 L (10.9 US qt) [b] Weight 80 kg (176 lb) [a] 98.9 kg (218 lb) [b] Available Control Features Shift Patterns Multiple (Selectable) Driver Shift Control Tap Up and Down Additional Modes Tow & Haul Mode (Selectable) Engine Torque Management On All Shifts Shift Control
This sensor determines the fluid temperature inside the transmission. This is often used for diagnostic purposes to check ATF (Automatic Transmission Fluid) at the correct temperature. The main use of this has been as a failsafe feature to downshift the transmission if the ATF becomes extremely hot.
It is a double overdrive transmission. The TR-6060 is manufactured by TREMEC (formerly Transmission Technologies Corporation) and is rated for 430 lb⋅ft (580 N⋅m) to 650 lb⋅ft (880 N⋅m) of torque, depending on gearing. [1] TREMEC sells the TR-6060 as the "Magnum" for aftermarket applications.