Search results
Results From The WOW.Com Content Network
For example, a blast furnace may have several "stoves" or "checkers" full of refractory fire brick. The hot gas from the furnace is ducted through the brickwork for some interval, say one hour, until the brick reaches a high temperature. Valves then operate and switch the cold intake air through the brick, recovering the heat for use in the ...
Blast furnaces differ from bloomeries and reverberatory furnaces in that in a blast furnace, flue gas is in direct contact with the ore and iron, allowing carbon monoxide to diffuse into the ore and reduce the iron oxide. The blast furnace operates as a countercurrent exchange process whereas a bloomery does not.
Direct reduction is the fraction of iron oxide reduction that occurs in a blast furnace due to the presence of coke carbon, while the remainder - indirect reduction - consists mainly of carbon monoxide from coke combustion. It should also be noted that many non-ferrous oxides are reduced by this type of reaction in a blast furnace.
Continuous production is a flow production method used to manufacture, produce, or process materials without interruption.Continuous production is called a continuous process or a continuous flow process because the materials, either dry bulk or fluids that are being processed are continuously in motion, undergoing chemical reactions or subject to mechanical or heat treatment.
Blast furnace gas (BFG) [1] is a by-product of blast furnaces that is generated when the iron ore is reduced with coke to metallic iron. It has a very low heating value , about 3.5 MJ/m 3 (93 BTU /cu.ft), [ 2 ] because it consists of about 51 vol% nitrogen and 22 vol% carbon dioxide , which are not flammable.
A furnace needs no less than two stoves, but may have three. One of the stoves is 'on gas', receiving hot gases from the furnace top and heating the checkerwork inside, whilst the other is 'on blast', receiving cold air from the blowers, heating it and passing it to the blast furnace.
Formats a time of day Template parameters [Edit template data] Parameter Description Type Status Hour hour hh 1 Hour of the day, in 24 hour format Example 13 Auto value Number required Minute minute mm 2 minutes after the hour Example 3 Auto value 0 Number suggested Second second ss sec 3 Seconds after the minute Number optional Hour format hour_format Formats hours and whether to render AM/PM ...
The PCI method is based on the simple concept of primary air (termed the "conveying gas") carrying pulverized coal which injected through a lance to the tuyere (mid-bottom inlet of a blast furnace), then mixed with secondary hot air (termed the "blast") supplied through a blowpipe in the tuyere and then piped to a furnace to create a balloon ...