Ads
related to: tractor tire size height chart
Search results
Results From The WOW.Com Content Network
Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.
A 1939 Model WC. 1942 Model WC at Jarrell Plantation A 1947 Model WC. A 1948 Model WC. The Model WC was a tractor made by Allis-Chalmers from 1933 to 1948. The WC was designed from its start as a nimble, low-cost, but well-powered row-crop tractor that would make the best use of pneumatic rubber tires, which Allis-Chalmers had just introduced to agriculture in 1932.
The underside view shows the arrangement of the 18 tires (wheels). Shown in blue in the underside view are the axles, drive shaft, and differentials. The legend for labeled parts of the truck is as follows: tractor unit; semi-trailer (detachable) engine compartment; cabin; sleeper (not present in all trucks) air dam; fuel tanks; fifth-wheel ...
Styled by Raymond Loewy, [1] [2] it was one of International Harvester's "letter series", replacing the Farmall F-20.The H was rated for two 14-inch (36 cm) plows. [3]The H is equipped with a 4-cylinder in-line overhead valve with a 152-cubic-inch (2,490-cubic-centimetre) displacement and a 6-volt, positive ground electrical system with generator, (when so ordered or retrofitted).
A size 55/80R63 radial tire was developed by Michelin in conjunction with Caterpillar specifically for the first generation 797. [16] The Caterpillar 797B and 797F run 4.028 m (13.22 ft) tall, 5,300 kg (11,680 lb) Michelin 59/80R63 XDR. Most first generation 797s have been retrofitted to use the 59/80R63 tires as well. [17]
In common with other tractors of the time, the Model B received a styled body, designed by industrial designer Brooks Stevens. [ 1 ] The Model B was initially powered by a Waukesha 113-cubic-inch (1,850 cc) four-cylinder engine, then from 1938 by an Allis-Chalmers 116.1-cubic-inch (1,903 cc) engine.