Ads
related to: straight pipe exhaust benefits
Search results
Results From The WOW.Com Content Network
The layout of a 4-2-1 system is as follows: four pipes (primary) come off the cylinder head, and merge into two pipes (secondary), which in turn finally link up to form one collector pipe. [2] Compared with a 4-1 exhaust system, a 4-2-1 often produces more power at mid-range engine speeds (RPM), while a 4-1 exhaust produces more power at high RPM.
When the descending piston first exposes the exhaust port on the cylinder wall, the exhaust flows out powerfully due to its pressure (without assistance from the expansion chamber) so the diameter/area over the length of the first portion of the pipe is constant or near constant with a divergence of 0 to 2 degrees which preserves wave energy.
The end of the final length of the exhaust pipe where it vents to open air, generally the only visible part of the exhaust system part on a vehicle, often ends with a straight or angled cut but may include a decorative tip. The tip is sometimes chromed. It frequently has a larger pipe than the rest of the exhaust system.
This is a pipe running from the crankcase (or the valve cover on an overhead valve engine) down to a downwards-facing open end located in the vehicle's slipstream. When the vehicle is moving, airflow across the open end of the tube creates suction (a "draught" or draft) that pulls gases out of the crankcase.
A hemispherical head ("hemi-head") gives an efficient combustion chamber with minimal heat loss to the head, and allows for two large valves.However, a hemi-head usually allows no more than two valves per cylinder due to the difficulty in arranging the valve gear for four valves at diverging angles, and these large valves are necessarily heavier than those in a multi-valve engine of similar ...
A screamer pipe is a type of exhaust configuration fitted to some automotive turbocharged petrol engines with an external wastegate set-up, which vents the waste exhaust to the atmosphere through a separate un-muffled pipe, rather than back into the main exhaust track. This exhaust setup is known for its loud noise.
An Eaton M62 Roots-type supercharger is visible at the front of this Ecotec LSJ engine in a 2006 Saturn Ion Red Line.. The Roots-type blower is simple and widely used. It can be more effective than alternative superchargers at developing positive intake manifold pressure (i.e., above atmospheric pressure) at low engine speeds, making it a popular choice for passenger automobile applications.
Scavenging is the process of replacing the exhaust gas in a cylinder of an internal combustion engine with the fresh air–fuel mixture (or fresh air, in the case of direct-injection engines) for the next cycle. If scavenging is incomplete, the remaining exhaust gases can cause improper combustion for the next cycle, leading to reduced power ...