Search results
Results From The WOW.Com Content Network
Trail can also vary as the suspension activates, in response to braking for example. As telescopic forks compress due to load transfer during braking, the trail and the wheelbase both decrease. [18] [self-published source?] At least one motorcycle, the MotoCzysz C1, has a fork with adjustable trail, from 89 to 101 mm [3.50 to 3.98 inches]. [19]
Newer suspension frame and fork designs have reduced weight, increased amount of suspension travel, and improved feel. Many lock out the rear suspension while the rider is pedaling hard or climbing, in order to improve pedaling efficiency. Most suspension frames and forks have about 4-6 inches (100–150 mm) of suspension travel.
Most motorcycles today use telescopic forks for the front suspension. The forks can most easily be understood as simply encased long coil springs with hydraulic damping of excess spring energy. They allow the front wheel to react to imperfections in the road while isolating the rest of the motorcycle from that motion. Telescopic forks on a 1969 BMW
1968 BMW R60US with conventional telescopic fork Telescopic fork in upside down design, with stanchions at the bottom.. Conventional telescopic forks invariably have a pair of fork tubes, or "stanchions", at the top, clamped to a triple tree (also called a triple clamp or a yoke), and the sliders are at the bottom, attached to the front wheel spindle.
The 'fork' on a motorcycle consists of multiple components. The triple trees (also known as yokes) hold the fork tubes (which contain the fork springs), and are fastened to the neck of the frame by the steering stem. At the bottom of the fork tubes are the lower legs, often referred to as sliders.
Plunger suspension on a 1953 BMW R51/3. A swingarm (or swinging arm), originally known as a swing fork or pivoted fork, is a single or double sided mechanical device which attaches the rear wheel of a motorcycle to its body, allowing it to pivot vertically.
Suspension fork of a mountain bike with disc brake Shape of a bicycle fork. A bicycle fork is the part of a bicycle that holds the front wheel. A fork typically consists of two blades which are joined at the top by a fork crown. The crown is often at the front.
Paul began developing the first bicycle suspension fork. In 1989 or 1990, Turner approached Simons for help designing a suspension fork for mountain bikes. Turner had in 1987, with the help of Keith Bontrager, presented a full bike with front and rear suspension at the bicycle industry trade show in Long Beach. The industry was not impressed.