Search results
Results From The WOW.Com Content Network
A gasoline engine burns a mix of gasoline and air, consisting of a range of about twelve to eighteen parts (by weight) of air to one part of fuel (by weight). A mixture with a 14.7:1 air/fuel ratio is stoichiometric, that is when burned, 100% of the fuel and the oxygen are consumed.
The efficiency often reported for a particular engine, however, is not its maximum efficiency but a fuel economy cycle statistical average. For example, the cycle average value of BSFC for a gasoline engine is 322 g/(kW⋅h), translating to an efficiency of 25% (1/(322 × 0.0122225) = 0.2540).
The measure of this is engine efficiency, often called thermal efficiency in the case of internal combustion engines. A diesel cycle engine can be as much as 40% to 50% efficient at converting fuel into work, [2] where a typical automotive gasoline engine's efficiency is about 25% to 30%. [3] [4]
The following table compares official EPA ratings for fuel economy (in miles per gallon gasoline equivalent, mpg-e or MPGe, for plug-in electric vehicles) for series production all-electric passenger vehicles rated by the EPA for model years 2015, [48] 2016, [49] 2017, [50] and 2023 [51] versus the model year 2016 vehicles that were rated the ...
However, practical Diesel engines are 30% - 35% more efficient than gasoline engines. [7] This is because, since the fuel is not introduced to the combustion chamber until it is required for ignition, the compression ratio is not limited by the need to avoid knocking, so higher ratios are used than in spark ignition engines.
Fuel consumption monitor from a 2006 Honda Airwave.The displayed fuel economy is 18.1 km/L (5.5 L/100 km; 43 mpg ‑US). A Briggs and Stratton Flyer from 1916. Originally an experiment in creating a fuel-saving automobile in the United States, the vehicle weighed only 135 lb (61.2 kg) and was an adaptation of a small gasoline engine originally designed to power a bicycle.
Volumetric efficiency (VE) in internal combustion engine engineering is defined as the ratio of the equivalent volume of the fresh air drawn into the cylinder during the intake stroke (if the gases were at the reference condition for density) to the volume of the cylinder itself.
The octane rating of gasoline is measured in a test engine and is defined by comparison with the mixture of 2,2,4-trimethylpentane (iso-octane) and normal heptane that would have the same anti-knocking capability as the fuel under test. The percentage, by volume, of 2,2,4-trimethylpentane in that mixture is the octane number of the fuel.