Ad
related to: is exhaust back pressure bad for engine coolant performance reviews
Search results
Results From The WOW.Com Content Network
The compression assembly system aims to decrease the thermal contact resistance between the thermoelectric module and the heat exchanger surfaces. In coolant-based ATEGs, the cold side heat exchanger uses engine coolant as the cooling fluid, while in exhaust-based ATEGs, the cold-side heat exchanger uses ambient air as the cooling fluid.
Two similar pipings with same pressure distance and head. The second pipe contains some obstructions for flow resulting in less discharge. A common example of backpressure is that caused by the exhaust system (consisting of the exhaust manifold, catalytic converter, muffler and connecting pipes) of an automotive four-stroke engine, which has a negative effect on engine efficiency, resulting in ...
The North American P-51 Mustang makes significant use of the Meredith effect in its belly radiator design. [1]The Meredith effect is a phenomenon whereby the aerodynamic drag produced by a cooling radiator may be offset by careful design of the cooling duct such that useful thrust is produced by the expansion of the hot air in the duct.
For hybrid applications, it also can warm the battery pack. The cooling system is connected to a heat exchanger placed in the exhaust gas transferring the thermal energy from the exhaust gas to the cooling system. When the engine is warmed up the exhaust gas is diverted to a by-pass pipe. [4]
The EBPV exhaust back-pressure valve (EBPV) was also prone to failure; it could close when cold and get stuck on causing a jet engine like noise coming from the exhaust. Most of the issues that came out of these motors were due to poor electrical connections.
A compromise is a wall temperature of 90 °C. The viscosity of the oil is optimized for just this temperature. Any cooling of the exhaust and the turbine of the turbocharger reduces the amount of power available to the turbine, so the exhaust system is often insulated between engine and turbocharger to keep the exhaust gasses as hot as possible.
An exhaust brake is a valve which essentially creates a back-pressure in the exhaust system, which applies enough force onto the engine's pistons to slow the engine. In most cases, an exhaust brake is so effective that it can slow a heavily-loaded vehicle on a downgrade without ever applying the vehicle’s service brakes.
When the piston is near to BDC the exhaust valve opens. In the blowdown, the combustion gases expand irreversibly due to the leftover pressure—in excess of back pressure, the gauge pressure on the exhaust port. Exhaust: The exhaust valve remains open while the piston moves upward expelling the combustion gases.