When.com Web Search

  1. Ads

    related to: extend usb cable over distance

Search results

  1. Results From The WOW.Com Content Network
  2. USB hub - Wikipedia

    en.wikipedia.org/wiki/USB_hub

    USB cables are limited to 3 metres (10 feet) for low-speed USB 1.1 devices. A hub can be used as an active USB repeater to extend cable length for up to 5 metre (16 feet) lengths at a time.

  3. Extension cord - Wikipedia

    en.wikipedia.org/wiki/Extension_cord

    Yellow NEMA 5-15 extension cord NEMA-1 extension cord, common in the United States Extension cord reel (Germany). An extension cord (US), extension cable, power extender, drop cord, or extension lead (UK) is a length of flexible electrical power cable (flex) with a plug on one end and one or more sockets on the other end (usually of the same type as the plug).

  4. HDBaseT - Wikipedia

    en.wikipedia.org/wiki/HDBaseT

    HDBaseT connectors at a presentation and collaboration system from WolfVision. HDBaseT is a consumer electronic (CE) and commercial connectivity standard for transmission of uncompressed ultra-high-definition video, digital audio, DC power, Ethernet, USB 2.0, and other control communication (such as RS-232 and Consumer IR) over a single category cable (Cat 5e or better) up to 100 m (328 ft) in ...

  5. USB hardware - Wikipedia

    en.wikipedia.org/wiki/USB_hardware

    In this way, cables with smaller 5 pin USB 2.0 Micro-B plugs can be plugged into devices with 10 contact USB 3.0 Micro-B receptacles and achieve backward compatibility. USB cables exist with various combinations of plugs on each end of the cable, as displayed below in the USB cables matrix. USB 3.0 Standard-B plug

  6. USB - Wikipedia

    en.wikipedia.org/wiki/USB

    They operate at 48 V DC and can supply more power (up to 12.95 W for 802.3af, 25.5 W for 802.3at, a.k.a. PoE+, 71 W for 802.3bt, a.k.a. 4PPoE) over a cable up to 100 meters compared to USB 2.0, which provides 2.5 W with a maximum cable length of 5 meters.

  7. USB communications - Wikipedia

    en.wikipedia.org/wiki/USB_communications

    USB signals are transmitted using differential signaling on a twisted-pair data cable with 90 Ω ± 15% characteristic impedance. [6] Low speed (LS) and Full speed (FS) modes use a single data pair, labelled D+ and D−, in half-duplex. Transmitted signal levels are 0.0–0.3 V for logical low, and 2.8–3.6 V for logical high level.