Ads
related to: removing bottom bracket on bike chain lock length 4 cm height difference
Search results
Results From The WOW.Com Content Network
The bottom bracket height is the vertical distance from the center of the bottom bracket to the ground, and it expresses clearance of the frame over obstacles. The height of the bottom bracket is of concern when designing the frame. The height of the bottom bracket is the baseline for the rider's height while riding.
A chain tool or chain splitter is used to 'break' a chain, in order to remove it from a bike or remove links, or to put a chain back together. A crank extractor is used to pull the crank off the bottom bracket spindle. A pedal wrench removes the pedals from the bicycle. It is also usually possible to use a common spanner in the correct size for ...
Chainstay: a pair of tubes on a bicycle frame that runs from the bottom bracket to the rear fork ends; Chain tensioner: a device to maintain proper chain tension; Chaintug: a device to aid in setting the proper chain tension; Cluster: a bicycle cogset, either a freewheel, or cassette
Frame size was traditionally measured along the seat tube from the center of the bottom bracket to the center of the top tube. Typical "medium" sizes are 54 or 56 cm (approximately 21.2 or 22 inches) for a European men's racing bicycle or 46 cm (about 18.5 inches) for a men's mountain bike.
Q factor is a function of both the bottom bracket width (axle length) and the cranks. Bottom brackets axles vary in length from 102mm to 127mm. Mountain bike cranks are typically about 20mm wider than road cranks. [6] A larger Q factor (wider tread) will mean less cornering clearance (while pedaling) for the same bottom bracket height and crank ...
Crank length is measured from the center of the pedal spindle to the center of the bottom bracket spindle or axle. The larger bicycle component manufacturers typically offer crank lengths for adult riders from 165 to 180 mm (6.5 to 7.1 in) long in 2.5 mm (0.098 in) increments, with 170 mm (6.7 in) cranks being the most common size.
The chain in use on modern bicycles has a 1 ⁄ 2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in "#40" indicates the pitch of the chain in eighths of an inch; and ISO standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.
A chain lock is a chain with a lock. It often has a key or a combination lock attached to it. A long enough chain can pass through both wheels, the frame and attach the bicycle to an immovable object. Because of their inherent flexibility, chains are easier to secure around tricky-shaped objects than D-locks. Chains vary widely in their ...