Search results
Results From The WOW.Com Content Network
In 1967, a new design high-rise cast-aluminum dual-plane intake manifold with larger smoother turn runners was introduced for the Z/28 that the 350 cu in (5.7 L)/370 hp 1970 LT1 also used. Unlike the Corvette, the exhaust manifolds were the more restrictive rear outlet 'log' design to clear the Camaro chassis's front cross-member. It had a ...
The Mercedes-Benz M272 engine is an automobile piston V6 engine family used in the 2000s (decade). Introduced in 2004, it is based on the M112 V6 introduced in 1998.. All M272 engines have aluminum engine blocks with a 90° V-angle with silicon/aluminum lined cylinders.
The 90° V6 engine uses the same transmission bellhousing pattern as the Chevrolet small-block V8 engine. The oil pan dipstick is located on the passenger side above the oil pan rail; this design was phased in on both the 90° V6 and Small Block Chevrolet assembly lines (for engines manufactured after 1979) sharing the same casting dies.
The 455 big block Olds V8 was replaced in 1977 with the 402.6 cu in (6.6 L; 6,598 cc) small block, which used a 4.351 in (110.5 mm) bore, the largest ever used in a small-block V8, with the Olds small-block standard deck and 3.385 in (86.0 mm) stroke.
The 6.2 L; 376.0 cu in (6,162 cc) EcoTec3 is a Generation V small-block V8 truck engine (VIN code "J"). The L86 is an LT1 engine modified for truck use with a compression ratio of 11.5 to 1. In 2019, GM introduced the L87 as the successor to the L86. Power and torque remain the same, but whereas the L86's "Active Fuel Management" alternates ...
The GM L3B engine is a turbocharged four-cylinder gasoline engine designed by General Motors. It is an undersquare aluminum DOHC inline-four displacing 2.7 liters (165 cid) and tuned for strong low-end torque.
In the Chevy II the engine was branded as the Super-Thrift 153, [1] [2] while in the 1964 Chevy Van, it was called the High Torque 153. [3] Peak power and torque were 90 hp (67 kW) at 4,000 rpm and 152 lb⋅ft (206 N⋅m) at 2,400 rpm. [1] [2] After the 1970 model year, the engine was discontinued in North America.
Also added was the #48 casting number heads with a 68 cc (4.15 cu in) chamber for higher compression, along with larger 2.11 and 1.77 in (54 and 45 mm) valves. Free-flowing exhaust manifolds from the 400 Ram Air were used late in the model year. This was underrated at 330 hp (246 kW).