Ads
related to: dimm slots 1 and 2
Search results
Results From The WOW.Com Content Network
Assorted SO-DIMM Modules A 200-pin PC2-5300 DDR2 SO-DIMM. A 204-pin PC3-10600 DDR3 SO-DIMM. A SO-DIMM slot on a computer motherboard. A SO-DIMM (pronounced "so-dimm" / ˈ s oʊ d ɪ m /, also spelled "SODIMM") or small outline DIMM, is a smaller alternative to a DIMM, being roughly half the physical size of a regular DIMM. The first SODIMMs had ...
From top to bottom: DIP, SIPP, SIMM (30‑pin), SIMM (72‑pin), DIMM (168‑pin), DDR DIMM (184‑pin). 16 GiB DDR4-2666 288-pin 1.2 V UDIMMs Dynamic random access memory is produced as integrated circuits (ICs) bonded and mounted into plastic packages with metal pins for connection to control signals and buses.
PC2-5300 DDR2 SO-DIMM (for notebooks) Comparison of memory modules for desktop PCs (DIMM) Comparison of memory modules for portable/mobile PCs (SO-DIMM) The key difference between DDR2 and DDR SDRAM is the increase in prefetch length. In DDR SDRAM, the prefetch length was two bits for every bit in a word; whereas it is four bits in DDR2 SDRAM.
The individual chips making up a 1 GB memory module are usually organized as 2 26 8-bit words, commonly expressed as 64M×8. Memory manufactured in this way is low-density RAM and is usually compatible with any motherboard specifying PC3200 DDR-400 memory.
As an example, take an i945 memory controller with four Kingston KHX6400D2/1G memory modules, where each module has a capacity of 1 GiB. [2] Kingston describes each module as composed of 16 "64M×8-bit" chips with each chip having an 8-bit-wide data bus. 16 × 8 equals 128, therefore, each module has two ranks of 64 bits each.
One 64 GiB DDR5-4800 ECC 1.1 V registered DIMM (RDIMM) Example of an unregistered DIMM (UDIMM) Registered memory (also called buffered memory) is computer memory that has a register between the DRAM modules and the system's memory controller. A registered memory module places less electrical load on a memory controller than an unregistered one.
Additionally, the thickness of DDR4 modules has been increased to 1.2 mm from 1.0 mm to support more signal layers, enhancing overall performance and reliability. [53] DDR4 DIMM modules have a slightly curved edge connector so not all of the pins are engaged at the same time during module insertion, lowering the insertion force. [13]
A Fully Buffered DIMM (FB-DIMM) is a type of memory module used in computer systems. It is designed to improve memory performance and capacity by allowing multiple memory modules to be each connected to the memory controller using a serial interface, rather than a parallel one.