Ads
related to: intel pci data acquisition and signal processing controller driverwiki-drivers.com has been visited by 100K+ users in the past month
pchelpsoft.com has been visited by 1M+ users in the past month
Search results
Results From The WOW.Com Content Network
As an example, assume the case of Wake-on-LAN. Traditionally, the OS controls Wake-on-LAN and must call third-party device drivers to enable support on a network card. With the HECI bus, the host is able to assert its request line (REQ#), the ME will assert its grant line (GNT#), and the host can send its message using its serial transmit signal.
The PIIX integrated an IDE controller with two 8237 DMA controllers, the 8254 PIT, and two 8259 PICs and a PCI to ISA bus bridge. It was introduced with the 430FX Triton chipset in 1995. [ 1 ] The mobile version was introduced with the 430MX mobile Triton chipset.
MSI (first defined in PCI 2.2) permits a device to allocate 1, 2, 4, 8, 16 or 32 interrupts. The device is programmed with an address to write to (this address is generally a control register in an interrupt controller), and a 16-bit data word to identify it. The interrupt number is added to the data word to identify the interrupt. [1]
Intel IPP is divided into four major processing groups: signal processing (with linear array or vector data), image processing (with 2D arrays for typical color spaces), data compression, and cryptography. [6] Half the entry points are of the matrix type, a third are of the signal type, and the remainder are of the image and cryptography types.
ICH - 82801AA. The first version of the ICH was released in June 1999 along with the Intel 810 northbridge.While its predecessor, the PIIX, was connected to the northbridge through an internal PCI bus with a bandwidth of 133 MB/s, the ICH used a proprietary interface (called by Intel Hub Interface) that linked it to the northbridge through an 8-bit wide, 266 MB/s bus.
Peripheral Component Interconnect (PCI) [3] is a local computer bus for attaching hardware devices in a computer and is part of the PCI Local Bus standard. The PCI bus supports the functions found on a processor bus but in a standardized format that is independent of any given processor's native bus.
The 8259 may be configured to work with an 8080/8085 or an 8086/8088. On the 8086/8088, the interrupt controller will provide an interrupt number on the data bus when an interrupt occurs. The interrupt cycle of the 8080/8085 will issue three bytes on the data bus (corresponding to a CALL instruction in the 8080/8085 instruction set).
The Platform Controller Hub (PCH) is a family of Intel's single-chip chipsets, first introduced in 2009. It is the successor to the Intel Hub Architecture, which used two chips–a northbridge and southbridge, and first appeared in the Intel 5 Series. The PCH controls certain data paths and support functions used in conjunction with Intel CPUs.