Search results
Results From The WOW.Com Content Network
Solids control is a process used in drilling rigs which use drilling fluid. ... The machines that use this principle are called shale shakers, and consist of a series ...
The control portion of the system can be located safely away, with the pneumatic plumbing isolating the hazardous from the safe area. Air bubbler systems are a good choice for open tanks at atmospheric pressure and can be built so that high-pressure air is routed through a bypass valve to dislodge solids that may clog the bubble tube.
A tricanter centrifuge operates on a similar principle to decanter centrifuges but instead separates three phases, consisting of a suspended solids phase and two immiscible liquids. [11] Sedimentation of the suspended solids occurs as normal where they accumulate on the wall of the bowl and are conveyed out of the centrifuge.
Surface mud systems. In the oil drilling industry, effective solids control can be attributed to the overall performance of all the components of the mud systems.Conditioning the drilling fluid with the goal of dramatically lowering maintenance cost, avoiding excessive chemical treatment and maintaining mud systems volume will decrease the chance of equipment failure, unnecessary high mud ...
A solid bowl centrifuge is a type of centrifuge that uses the principle of sedimentation. A centrifuge is used to separate a mixture that consists of two substances with different densities by using the centrifugal force resulting from continuous rotation. It is normally used to separate solid-liquid, liquid-liquid, and solid-solid mixtures.
Mixing of liquids occurs frequently in process engineering. The nature of liquids to blend determines the equipment used. Single-phase blending tends to involve low-shear, high-flow mixers to cause liquid engulfment, while multi-phase mixing generally requires the use of high-shear, low-flow mixers to create droplets of one liquid in laminar, turbulent or transitional flow regimes, depending ...
If we know that the removal efficiency for the slurry tank is 60%, then the water outlet will contain 20 kg/min of solids (40% times 100 kg/min times 50% solids). If we measure the flow rate of the combined solids and water, and the water outlet is shown to be 65 kg/min, then the amount of water exiting via the conveyor belt must be 5 kg/min ...
Gravity settling over several days allows water and solids settle out. Heating crude oil reduces its viscosity aiding further separation of these components. Certain chemicals added to crude oil can act to aid separation. Surfactants help water to separate from the oil. Paraffin thinners allow heavier fractions in the oil to flow more easily.