Search results
Results From The WOW.Com Content Network
The difference is that whilst D1 has a 4:3 aspect ratio 960H has a 16:9 widescreen aspect ratio. The extra pixels are used to form the increased area to the sides of the D1 image. The pixel density of 960H is identical to standard D1 resolution so it does not give any improvement in image quality, merely a wider aspect ratio.
A higher ratio gives a too fluid concrete mix resulting in a too porous hardened concrete of poor quality. Often, the concept also refers to the ratio of water to cementitious materials, w/cm. Cementitious materials include cement and supplementary cementitious materials such as ground granulated blast-furnace slag (GGBFS), fly ash (FA), silica ...
On CRTs, there was often a difference between the aspect ratio of the computer resolution and the aspect ratio of the display causing non-square pixels (e.g. 320 × 200 or 1280 × 1024 on a 4:3 display). The 4:3 aspect ratio was common in older television cathode ray tube (CRT) displays, which were not easily adaptable to a wider aspect ratio.
The display aspect ratio (DAR) is the aspect ratio of a display device and so the proportional relationship between the physical width and the height of the display. It is expressed as two numbers separated by a colon ( x : y ), where x corresponds to the width and y to the height.
The aspect ratio of 4:3. Fullscreen (or full screen) refers to the 4:3 (1. 33:1) aspect ratio of early standard television screens and computer monitors. [1] Widescreen ratios started to become more popular in the 1990s and 2000s. Film originally created in the 4:3 aspect ratio does not need to be altered for full-screen release.
The ultimate strength of concrete is influenced by the water-cementitious ratio (w/cm), the design constituents, and the mixing, placement and curing methods employed.All things being equal, concrete with a lower water-cement (cementitious) ratio makes a stronger concrete than that with a higher ratio. [2]
The amount of fibers added to a concrete mix is expressed as a percentage of the total volume of the composite (concrete and fibers), termed "volume fraction" (V f). V f typically ranges from 0.1 to 3%. The aspect ratio (l/d) is calculated by dividing fiber length (l) by its diameter (d).
Self-consolidating concrete or self-compacting concrete (SCC) [1] is a concrete mix which has a low yield stress, high deformability, good segregation resistance (prevents separation of particles in the mix), and moderate viscosity (necessary to ensure uniform suspension of solid particles during transportation, placement (without external compaction), and thereafter until the concrete sets).