Search results
Results From The WOW.Com Content Network
This part of the line display process is the Horizontal Blank. [1] [2] In detail, the Horizontal blanking interval consists of: front porch – blank while still moving right, past the end of the scanline, sync pulse – blank while rapidly moving left; in terms of amplitude, "blacker than black".
A raster interrupt (also called a horizontal blank interrupt) is an interrupt signal in a legacy computer system which is used for display timing. It is usually, though not always, generated by a system's graphics chip as the scan lines of a frame are being readied to send to the monitor for display.
A scan line (also scanline) is one line, or row, in a raster scanning pattern, such as a line of video on a cathode-ray tube (CRT) display of a television set or computer monitor. [1] On CRT screens the horizontal scan lines are visually discernible, even when viewed from a distance, as alternating colored lines and black lines, especially when ...
Television lines (TVL) is a specification of an analog camera or monitor's horizontal image resolution. [1] The TVL is one of the most important resolution measures in a video system. The TVL can be measured with the standard EIA 1956 resolution chart .
This is the highest resolution that generally can be displayed on analog computer monitors (most CRTs), and the highest resolution that most analogue video cards and other display transmission hardware (cables, switch boxes, signal boosters) are rated for (at 60 Hz refresh). 24-bit colour requires 9 MB of video memory (and transmission ...
In Microsoft Windows operating system specifically, the larger taskbar of Windows 7 occupies an additional 16-pixel lines by default, which may compromise the usability of programs that already demanded a full 1024 × 768 (instead of, e.g. 800 × 600) unless it is specifically set to use small icons; an "oddball" 784-line resolution would ...
The highest display resolution of any mode was 640 × 200, and the highest color depth supported was 4-bit (16 colors). The CGA card could be connected either to a direct-drive CRT monitor using a 4-bit digital RGBI interface, such as the IBM 5153 color display, or to an NTSC-compatible television or composite video monitor via an RCA connector ...
Hence the picture will have thin black bars down each side. 704 is the nearest mod(16) value to the actual analogue line lengths, and avoids having black bars down each side. The use of 704 can be further justified as follows: 625-line analogue video contains 575 active video lines [14] (this includes two half lines). When the half lines are ...