Ads
related to: tool box locks keyed same
Search results
Results From The WOW.Com Content Network
In pin tumbler locks, the series of key cuts on a key causes the pins to line up at the shear line or gate so the lock will open. In warded locks, the key cuts bypass the wards so the key can push or pull the bolt. [6] Key pin In a pin tumbler lock, the key pin is in contact with the key. It has varying lengths, corresponding to the key's ...
Locks are usually re keyed to build master-key systems, make a set of locks share a common key, or to eliminate compromised keys. [2] [3] [4] Sometimes worn pins are replaced with new pins if the old pins become too short to reach the shear-line. [5] The shear-line is the thin line shared by the lock plug and its cylindrical housing. If a pin ...
A master key operates a set of several locks. Usually, there is nothing different about the key. The differences are in the locks the key will operate. These master-keyed locks are configured to operate with two, or more, different keys: one specific to each lock (the change key), which cannot operate any of the others in the set, and the ...
The bitting code is used in conjunction with a key's Depth and Spacing Number to completely determine all relevant information regarding the key's geometry. [1] Each number in the bitting code corresponds to a cut on the key blade. For example, a bitting code of 11111 with Depth and Spacing Number 46 specifies a Kwikset key with five shallow cuts.
The normal key on the left will open only the lock that it goes to, but the skeleton key on the right will open any lock with this particular keyhole. Two warded lock keys and a homemade skeleton key A skeleton key (also known as a passkey [ 1 ] ) is a type of master key in which the serrated edge has been removed in such a way that it can open ...
The keyhole of a mechanical cam lock is usually the same as an ordinary padlock. A physical key is used to unlock the lock. The physical key has a notch or slot corresponding to the obstacle in the cam lock, allowing it to rotate freely in the lock. Different from mechanical cam locks, electronic cam locks use an electronic key to unlock. The ...