Search results
Results From The WOW.Com Content Network
20 Gbit/s: 2 GB/s: 2012 Direct Media Interface 2.0 (DMI 2.0; ×4 link) 20 Gbit/s: 2 GB/s: 2011 PCI Express 1.0 (×8 link) [l] 20 Gbit/s: 2 GB/s: 2004 PCI Express 2.0 (×4 link) [m] 20 Gbit/s: 2 GB/s: 2007 AGP 8×: 17.066 Gbit/s: 2.133 GB/s: 2002 PCI-X DDR: 17.066 Gbit/s: 2.133 GB/s: RapidIO Gen2 4×: 20 Gbit/s: 2.5 GB/s: Sun JBus (200 MHz) 20. ...
For example, a data bus eight-bytes wide (64 bits) by definition transfers eight bytes in each transfer operation; at a transfer rate of 1 GT/s, the data rate would be 8 × 10 9 B/s, i.e. 8 GB/s, or approximately 7.45 GiB/s. The bit rate for this example is 64 Gbit/s (8 × 8 × 10 9 bit/s).
In telecommunications and computing, bit rate (bitrate or as a variable R) is the number of bits that are conveyed or processed per unit of time. [1]The bit rate is expressed in the unit bit per second (symbol: bit/s), often in conjunction with an SI prefix such as kilo (1 kbit/s = 1,000 bit/s), mega (1 Mbit/s = 1,000 kbit/s), giga (1 Gbit/s = 1,000 Mbit/s) or tera (1 Tbit/s = 1,000 Gbit/s). [2]
The ISQ symbols for the bit and byte are bit and B, respectively.In the context of data-rate units, one byte consists of 8 bits, and is synonymous with the unit octet.The abbreviation bps is often used to mean bit/s, so that when a 1 Mbps connection is advertised, it usually means that the maximum achievable bandwidth is 1 Mbit/s (one million bits per second), which is 0.125 MB/s (megabyte per ...
OC-192 is a network line with transmission speeds of up to 9953.28 Mbit/s (payload: 9510.912 Mbit/s (9.510912 Gbit/s); overhead: 442.368 Mbit/s). A standardized variant of 10 Gigabit Ethernet , called WAN PHY , is designed to inter-operate with OC-192 transport equipment while the common version of 10 Gigabit Ethernet is called LAN PHY (which ...
CFexpress Type B: XQD form factor (38.5 mm × 29.8 mm × 3.8 mm), PCIe 3.0 x2 (1.97 GB/s), NVMe 2.0 2019 ? CFexpress Type A: 20 mm × 28 mm × 2.8 mm, PCIe 3.0 x1 (1.0 GB/s), NVMe [citation needed] CFexpress Type C: 54 mm × 74 mm × 4.8 mm, PCIe 3.0 x4 (4.0 GB/s), NVMe [citation needed] – – – – PCIe 3.0 x8 (8.0 GB/s), NVMe MultiMediaCard
The naming convention for DDR, DDR2 and DDR3 modules specifies either a maximum speed (e.g., DDR2-800) or a maximum bandwidth (e.g., PC2-6400). The speed rating (800) is not the maximum clock speed, but twice that (because of the doubled data rate). The specified bandwidth (6400) is the maximum megabytes transferred per second using a 64-bit width.
Generally, layers are named by their specifications: [8] 10, 100, 1000, 10G, ... – the nominal, usable speed at the top of the physical layer (no suffix = megabit/s, G = gigabit/s), excluding line codes but including other physical layer overhead (preamble, SFD, IPG); some WAN PHYs (W) run at slightly reduced bitrates for compatibility reasons; encoded PHY sublayers usually run at higher ...