Ads
related to: 5 gallon bucket cyclone dust collector
Search results
Results From The WOW.Com Content Network
A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system.
Multiple-cyclone separators remove more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates.
Cyclonic scrubbers are generally low- to medium-energy devices, with pressure drops of 4 to 25 cm (1.5 to 10 in) of water. Commercially available designs include the irrigated cyclone scrubber and the cyclonic spray scrubber. In the irrigated cyclone (Figure 1), the inlet gas enters near the top of the scrubber into the water sprays. The gas is ...
Most venturi systems operate with an L/G ratio of 0.4 to 1.3 L/m 3 (3 to 10 gal/1000 ft 3). [4] L/G ratios less than 0.4 L/m 3 (3 gal/1000 ft 3) are usually not sufficient to cover the throat, and adding more than 1.3 L/m 3 (10 gal/1000 ft 3) does not usually significantly improve particle collection efficiency.
For applications where there is relatively low dust loading and gas temperatures are 250 °F (121 °C) or less, pleated, nonwoven cartridges are sometimes used as filtering media instead of bags. [4] [5] Dust-laden gas or air enters the baghouse through hoppers and is directed into the baghouse compartment. The gas is drawn through the bags ...
Smaller versions, for use in garages or small workshops, are usually electrically powered. Larger models, which can store over 200 litres (44 imp gal; 53 US gal), are often hooked up to compressed air, utilizing the Venturi effect to produce a partial vacuum. Built-in dust collection systems are also used in many workshops.