Search results
Results From The WOW.Com Content Network
A pressurized heavy-water reactor (PHWR) is a nuclear reactor that uses heavy water (deuterium oxide D 2 O) as its coolant and neutron moderator. [1] PHWRs frequently use natural uranium as fuel, but sometimes also use very low enriched uranium.
The Germans would have needed about 5 tons of heavy water to get a nuclear reactor running. The manifest clearly indicated that there was only half a ton of heavy water being transported to Germany. Hydro was carrying far too little heavy water for one reactor, let alone the 10 or more tons needed to make enough plutonium for a nuclear weapon. [77]
Range of possible CANDU fuel cycles: CANDU reactors can accept a variety of fuel types, including the used fuel from light-water reactors. A heavy-water design can sustain a chain reaction with a lower concentration of fissile atoms than light-water reactors, allowing it to use some alternative fuels; for example, "recovered uranium" (RU) from ...
Some moderators are quite expensive, for example beryllium, and reactor-grade heavy water. Reactor-grade heavy water must be 99.75% pure to enable reactions with unenriched uranium. This is difficult to prepare because heavy water and regular water form the same chemical bonds in almost the same ways, at only slightly different speeds.
The advanced heavy-water reactor (AHWR) or AHWR-300 is the latest Indian design for a next-generation nuclear reactor that burns thorium in its fuel core. It is slated to form the third stage in India's three-stage fuel-cycle plan. [1] This phase of the fuel cycle plan was supposed to be built starting with a 300 MWe prototype in 2016. [2]
At the very beginning the RB reactor was designed and constructed as an unreflected zero power heavy water - natural uranium critical assembly. First criticality was reached in April 1958. Later, the 2% enriched metal uranium fuel and 80% enriched UO 2 fuel were obtained and used in the reactor core.
About 2/3 are pressurized water reactors at even higher pressure. Current reactors stay under the critical point at around 374 °C and 218 bar where the distinction between liquid and gas disappears, which limits thermal efficiency, but the proposed supercritical water reactor would operate above this point. Heavy water reactors use deuterium ...
The IPHWR-700 (Indian Pressurized Heavy Water Reactor-700) is an Indian pressurized heavy-water reactor designed by the NPCIL. [1] It is a Generation III reactor developed from earlier CANDU based 220 MW and 540 MW designs. It can generate 700 MW of electricity.