Ads
related to: 2pge13e36090p 1a plus a 1 4 plug hard to get on hot water heater expansion tank
Search results
Results From The WOW.Com Content Network
This is a unique-looking barrel connector, apparently intended for providing a DC output jack (most DC jacks are used for power input).. Possibly available in multiple voltage ranges, the one for voltage classification 2 (3.15 to 6.3 V) has an outside diameter of 4.75 mm and a protruding pin of 2.5 mm diameter.
BS 1362 specifies sand-filled ceramic-bodied cylindrical fuses, with dimensions of 1 in (25 mm) in length, with two metallic end caps of 1 ⁄ 4 in (6.4 mm) diameter and roughly 1 ⁄ 5 in (5.1 mm) long. The standard specifies breaking time versus current characteristics only for 3 A or 13 A fuses.
The addition is a 3 ⁄ 16-inch (4.8 mm) diameter round or U-shaped ground pin, 1 ⁄ 8 in (3.2 mm) longer than the power blades (so the device is grounded before the power is connected) and located from them by 1 ⁄ 4 in (6.4 mm) edge-to-edge or 15 ⁄ 32 in (11.9 mm) center-to-center.
IEC 60309 (formerly IEC 309 and CEE 17, also published by CENELEC as EN 60309) is a series of international standards from the International Electrotechnical Commission (IEC) for "plugs, socket-outlets and couplers for industrial purposes".
SEV 1011 defines a "Type 1x" series of 10 A plugs and sockets. The type 11 plug is unearthed, with two 4 mm diameter round pins spaced 19 mm apart. The type 12 plug adds a central 4 mm diameter round earth pin, offset by 5 mm. The type 12 socket has no recess, while the type 13 socket is recessed.
This is an accepted version of this page This is the latest accepted revision, reviewed on 14 February 2025. Family of electrical connectors Anderson Powerpole Anderson Powerpole 15/30/45 ampere housings and contacts (front view) Type Electrical connector The Anderson Powerpole is a family of electrical connectors by Anderson Power Products (APP), although plug compatible connectors are now ...
The type 15 plug and socket has 3 round pins of 4 mm diameter, plus 2 flat pins (for L2 and L3). It is designed for three phase applications and is rated at 10 A, 250 V/440 V. The socket will also accept types 11 and 12 plugs, and the Europlug. The type 25 plug and socket has 3 rectangular pins, 4 mm x 5 mm, plus 2 flat pins (for L2 and L3).
Polarised pre-fitted plugs on appliances are therefore connected with the brown line wire to the right pin and the blue neutral wire to the left, the earth being connected to the contact at the "top" of the plug. CEE 7/2 and 7/4 plugs are not compatible with the CEE 7/5 socket because of the round earthing pin permanently mounted in the socket.