Search results
Results From The WOW.Com Content Network
Wing twist is an aerodynamic feature added to aircraft wings to adjust lift distribution along the wing.. Often, the purpose of lift redistribution is to ensure that the wing tip is the last part of the wing surface to stall, for example when executing a roll or steep climb; it involves twisting the wingtip a small amount downwards in relation to the rest of the wing.
The wing is designed so that the angle of incidence is greater at the wing roots and decreases across the span, becoming lowest at the wing tip. This is usually to ensure that at stall speed the wing root stalls before the wing tips , providing the aircraft with continued aileron control and some resistance to spinning .
The B-52G has no ailerons. The spoilers, situated inboard and forward of the trailing edge, are used for lateral control at high speeds to prevent excessive wing twist. [4] The Mitsubishi Diamond Jet, Beechjet, and Hawker 400 family of business aircraft incorporate full length spoilerons that also double as speed spoilers during flight and landing.
The inner workings of spoilers in lift dump deployment during the landing of an Airbus A320 A spoiler (the parts of the wing that are raised up) during the landing of an Airbus A321 The right wing of a Boeing 767-300ER during descent with spoilers partially deployed Spoilers deployed to slow down for descent on a Qantas Boeing 737-800
The non-planar wing tip is often swept back like a raked wingtip and may also be combined with a winglet. A winglet is also a special case of a non-planar wingtip. [citation needed] Aircraft designers employed mostly planar wing designs with simple dihedral after World War II, prior to the introduction of winglets.
The first successful wing sweep in flight was carried out by the Bell X-5 in the early 1950s. In the Beech Starship, only the canard foreplanes have variable sweep. Oblique wing: a single full-span wing pivots about its midpoint, as used on the NASA AD-1, so that one side sweeps back and the other side sweeps forward.
Development of an effective set of flight control surfaces was a critical advance in the development of aircraft. Early efforts at fixed-wing aircraft design succeeded in generating sufficient lift to get the aircraft off the ground, but once aloft, the aircraft proved uncontrollable, often with disastrous results. The development of effective ...
Camber is usually designed into an airfoil to raise its maximum lift coefficient C Lmax.This minimizes the stalling speed of aircraft using the airfoil. An aircraft with wings using a cambered airfoil will have a lower stalling speed than an aircraft with a similar wing loading and wings using a symmetric airfoil.