Ads
related to: ball joint testing machine
Search results
Results From The WOW.Com Content Network
During a typical test, a ball is slid on an angle along a track until it impacts a surface and then bounces off of the surface. The friction produced in the contact between the ball and the surface results in a horizontal force on the surface and a rotational force on the ball.
A typical ball joint with cutaway view (right) An inner tie rod end cut open to expose the ball joint. In an automobile, ball joints are spherical bearings that connect the control arms to the steering knuckles, and are used on virtually every automobile made. [1] They bionically resemble the ball-and-socket joints found in most tetrapod ...
The machines grip on the test specimen must be 63 mm (2.5 in). The code specifies what needs to be recorded from the test such as material used, material thickness and other necessary sample measurements, and material properties. ASTM also governs on precision of testing, and avoiding bias in the results. [4]
The Vickers hardness test was developed in 1921 by Robert L. Smith and George E. Sandland at Vickers Ltd as an alternative to the Brinell method to measure the hardness of materials. [1] The Vickers test is often easier to use than other hardness tests since the required calculations are independent of the size of the indenter, and the indenter ...
Dye-n-Pry is a useful failure analysis technique to detect cracking or open circuits in BGA solder joints. [2] This has some practical advantages over other destructive techniques, such as cross sectioning, as it can inspect a full ball grid array which may consist of hundreds of solder joints. Cross sectioning, on the other hand, may only be ...
The Zwick Roell Group is a manufacturer of static testing machines and systems for materials and components testing used to evaluate the mechanical and physical properties and performance of materials and components.