Ads
related to: 2.5 inch pool backwash hose
Search results
Results From The WOW.Com Content Network
5-inch (13 cm) flex suction hose with Storz fittings, mounted on an engine. Flexible suction hose (Flex suction or suction hose), not to be confused with hard suction hose in U.S., is a specific type of fire hose used in drafting operations, when a fire engine uses a vacuum to draw water from a portable water tank, pool, or other static water source.
1-inch hose with 1-8 NH NFPA threads (NFPA 1963 requirement; a.k.a. "Chemical Hose Thread" and "Booster Hose Thread" [7]; the chemical hose thread term likely originates from its use on chemical fire engines, an early firefighting device used from 1872 until the 1930s that used a combination of bicarbonate of soda and sulfuric acid to force ...
When any of these pool chemicals are used, it is very important to keep the pH of the pool in the range 7.2 to 7.8 – according to the Langelier Saturation Index, or 7.8 to 8.2 – according to the Hamilton Index; higher pH drastically reduces the sanitizing power of the chlorine due to reduced oxidation-reduction potential (ORP), while lower ...
Hose link is a 1/4-turn bayonet-mount garden hose connection, which uses an o-ring to o-ring seal. It was designed by Hoselink, Pty, Ltd., Australia, [24] and patented in 1998. [25] It is popular in Australia, with limited distribution in the UK and the US, where it is distributed by Dayco Products, Inc.
Fire hose used to apply water or other fire fighting agent directly to a fire or burning substance. Typically of 2 + 1 ⁄ 2 inches (64 mm) diameter or less in the United States. Historically 1.5 inch hose was the primary initial attack line but has been supplanted in most of the US by 1.75-inch-diameter (44 mm) hose that carries 175 gallons ...
Nomal operating flux and pressure drop are between 3-7 gpm/ft2 and 3-7 psi. When pressure drop increases above 10 psi, a backwash operation ins needed, which consist of reversing the flow (water goes upwards) in order to remove the particles trapped in the filtering media, and this will exit from the top of the filter with the backwash water.