Search results
Results From The WOW.Com Content Network
An aircraft moves at any given moment in one or more of three axes: roll (the axis that runs the length of the fuselage), pitch (the axis running laterally through the wings), and yaw (the vertical axis around which the front of the aircraft turns to the left or right whilst its rear turns toward the opposite direction).
The pilot uses the yoke to control the attitude of the plane, usually in both pitch and roll. Rotating the control wheel controls the ailerons and the roll axis. Fore and aft movement of the control column controls the elevator and the pitch axis. [1] When the yoke is pulled back, the nose of the aircraft rises.
Maneuvering planes, showing oblique and vertical turns. Maneuvers are rarely performed in the strictly vertical or horizontal planes. Most turns contain some degree of "pitch" or "slice". During a turn in an oblique plane, a pitch turn occurs when the aircraft's nose points above the horizon, causing an increase in altitude.
Flying over Cold Bay, Alaska, the plane's number 4 engine propeller detached itself from the engine and cut a hole in the plane as it flew underneath it. The resultant damage inflicted by the propeller caused an explosive decompression, severed cables connected to the plane's throttles and control surfaces and left the flight deck crew of three ...
In aerobatics, the cobra maneuver (or just the cobra), also called dynamic deceleration, [1] among other names (see § Etymology), is a dramatic and demanding maneuver in which an airplane flying at a moderate speed abruptly raises its nose momentarily to a vertical and slightly past vertical attitude, causing an extremely high angle of attack and making the plane into a full-body air brake ...
When viewing the formation from above, the positions of the planes resemble the tips of the four fingers of a human right hand (without the thumb), giving the formation its name. The lead element is made up of the flight leader at the very front of the formation and one wingman to his rear left. The second element is made up of an additional ...
Entry procedure for a steep turn involves putting the aircraft into a bank (left or right), simultaneously increasing the thrust adequately to maintain altitude, while pulling back on the flight stick or flight yoke to speed up the turning process. For Jet training an increase of 7-8% of N1 caters.
A raised aileron reduces lift on that wing and a lowered one increases lift, so moving the aileron control in this way causes the left wing to drop and the right wing to rise. This causes the aircraft to roll to the left and begin to turn to the left. Centering the control returns the ailerons to the neutral position, maintaining the bank angle ...