Search results
Results From The WOW.Com Content Network
The Air Force uses 10% of the nation's aviation fuel. (JP-8 accounts for nearly 90% of its fuels.) This fuel usage breaks down as such: 82% jet fuel, 16% facility management and 2% ground vehicle/equipment. [4] To meet renewable energy goals, the Air Force plans to certify its entire fleet on coal-to-liquid synthetic fuel blends by 2011.
Engine: General Engine Products (GEP) V8, 6.5L Turbocharged Diesel [1] 190 hp (140 kW) [1] Payload capacity: M1151: 4,000 lb (1,800 kg) M1151A1: 3,950 lb (1,790 kg)
JP-8, or JP8 (for "Jet Propellant 8"), is a jet fuel, specified and used widely by the US military.It is specified by MIL-DTL-83133 and British Defence Standard 91-87, and similar to commercial aviation's Jet A-1, but with the addition of corrosion inhibitor and anti-icing additives.
Class II – Supplies for which allowances are established by tables of organization and equipment, e.g., clothing, weapons, tools, spare parts, vehicles. Class III – Petroleum, oil and lubricants (POL) for all purposes, except for operating aircraft or for use in weapons such as flamethrowers, e.g., gasoline, fuel oil, greases, coal, and coke.
The Army expected the JLTV program to cut about five years off of the total program and save about US$5.9 billion, as Oshkosh's final competitive bid was low enough so the Army decided to "buy to budget" and get more platforms each year, which shrunk the total length of the contract and increased cost avoidances accrued each year.
In addition to 3,000-shp output, the targets for AATE were a 25% reduction in fuel consumption (less than 0.347 lb/(hp⋅h), 211 g/kWh), a 65% improvement in power to weight (more than 6.5 hp/lb, 10.7 kW/kg), a 20% improvement in design life (more than 6000 hours and 15000 cycles), a 35% reduction in production (less than $650k per engine) and maintenance cost, and a 15% reduction in product ...
Toggle the table of contents. ... It was the primary U.S. Air Force jet fuel between 1951 and 1995. MC-77 is the Swedish military equivalent of JP-4. [3]
The M915 has a 855 cu in (14.0 L) Cummins NTC 400 developing 400 hp (300 kW) at 2100rpm and 1,150 lbf⋅ft (1,559 N⋅m) of torque at 1500rpm. The M915A2 had a 775 cu in (12.7 L) Detroit Diesel Series 60 DDEC II developing 400 hp (300 kW) at 2100rpm and 1,400 lbf⋅ft (1,898 N⋅m) of torque at 1200rpm.