Search results
Results From The WOW.Com Content Network
English: The image gives six circuit diagrams (schematics) for balanced line antenna tuners of the tuned-transformer type, discussed in the Wikipedia article "Antenna Tuner" or "ATU". It is an edited version of the original by JNRSTANLEY uploaded 2014-10-15.
Isotron is the trade name for a shortwave antenna marketed by Bilal Co. for use as an amateur radio transmitting antenna for restricted spaces. [1] It is physically short as compared to a dipole antenna for a given frequency. It consists of a coil placed between two angled sheet metal plates.
You are free: to share – to copy, distribute and transmit the work; to remix – to adapt the work; Under the following conditions: attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made.
The ground rods create a ground plane under the antenna which increases the gain. The ground rods may extend horizontally from the base, but in antennas fed by coaxial cable as shown here they are usually sloped downward to increase the radiation resistance of the antenna from the 36 ohms of a quarter wave monopole closer to 50 ohms, so the ...
Inevitably some antennas won't conveniently fit into any one basic type, so the last section on real antennas is an "everything else" category for a few peculiar antennas that don't fit cleanly into any of the categories or subcategories used in this article; for example, random wire antennas and antennas that are laid down on the ground ...
An antenna array consisting of two such antennas, one above the other and driven in phase has a gain of up to 17 dBi. Being log-periodic, the antenna's main characteristics ( radiation pattern , gain, driving point impedance ) are almost constant over its entire frequency range, with the match to a 300 Ω feed line achieving a standing wave ...
The J-pole antenna is an end-fed omnidirectional half-wave antenna that is matched to the feedline by a shorted quarter-wave parallel transmission line stub. [5] [1] [6] For a transmitting antenna to operate efficiently, absorbing all the power provided by its feedline, the antenna must be impedance matched to the line; it must have a resistance equal to the feedline's characteristic impedance.
English: Diagram of a corner reflector antenna. It consists of a half wave dipole antenna mounted in front of two flat rectangular reflectors joined at an angle θ which is usually 90°. The reflector is usually made of rods parallel to the dipole element. Corner reflector antennas have gain of 12-15 dBi, high front-to-back ratio, and wide ...