Search results
Results From The WOW.Com Content Network
A tubeless tire (also spelled as tubeless tyre in Commonwealth English) is a pneumatic tire that does not require a separate inner tube.. Unlike pneumatic tires which use a separate inner tube, tubeless tires have continuous ribs molded integrally into the bead of the tire that are forced by air pressure into a flange on the metal rim of the wheel, sealing the tire to the rim.
A bicycle tire is a tire that fits on the wheel of a bicycle or similar vehicle. These tires may also be used on tricycles, wheelchairs , and handcycles , frequently for racing . Bicycle tires provide an important source of suspension , generate the lateral forces necessary for balancing and turning , and generate the longitudinal forces ...
A tubeless tire system requires an airtight rim — capable of being sealed at the valve stem, spoke holes (if they go all the way through the rim) and the tire bead seat — and a compatible tire. Universal System Tubeless (UST), originally developed by Mavic, Michelin and Hutchinson [11] for mountain bikes is the most common system of ...
1- or 2-digit/letter combination: Speed rating; see table below. Additional marks: see subheading below. As an example, if a tire size has two sets of numbers (6-12, 5.00-15, 11.2-24), then the first number (5.00-15) is the approximate width in inches, and the second number (5.00-15) is the rim diameter in inches.
The Presta valve (also French valve (FV) or Sclaverand valve) is a type of tire valve commonly found on high pressure bicycle inner tubes and is commonly used on tubeless setups. It consists of an outer valve stem and an inner valve body. A lock nut to secure the stem at the wheel rim and a valve cap may also be present.
A typical example of a tire marking according to ISO 5775-1 is: 32-597 inflate to 400 kPa. The first number (nominal section width) is essentially the width of the inflated tire (minus any tread). The second number (nominal rim diameter) is the inner diameter of the tire when it is mounted on the rim.
The combination of a tubular tyre and its tubular rim is lighter than that of a clincher tyre and clincher rim, and will therefore always result in less rotating mass or a stronger construction. [5] Tubulars can also be used over a wider range of tyre pressures from 1.7 to 14 bar (25 to 200 psi), compared to the typical 6-9 bar on a clincher tyre.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.