Search results
Results From The WOW.Com Content Network
The Picatinny rail has a similar profile to the Weaver, but the recoil groove width of the Picatinny rail is 0.206 in (5.23 mm) versus 0.180 in (4.57 mm) of the Weaver rail/mount, and by contrast with the Weaver, the spacing of the Picatinny recoil groove centers is consistent, at 0.394 in (10.01 mm). [5]
Weaver rail mount, early rail system used for scope mounts, still has some popularity in the civilian market; Picatinny rail (MIL-STD-1913 or STANAG 2324 rail (cancelled)), the improved and military standardized version of the Weaver mount developed by Picatinny Arsenal in New Jersey. Used for both for scope mounts and for accessories (such as ...
It is similar in concept to the earlier commercial Weaver rail mount used to mount telescopic sights, but is taller and has wider slots at regular intervals along the entire length. The MIL-STD-1913 locking slot width is 0.206 in (5.23 mm). The spacing of slot centres is 0.394 in (10.01 mm) and the slot depth is 0.118 in (3.00 mm). [8]
Scope mounts are rigid implements used to attach (typically) a telescopic sight or other types of optical sights onto a firearm. The mount can be made integral to the scope body (such as the Zeiss rail) or, more commonly, an external fitting that clamp onto the scope tube via screw-tightened rings (similar to pipe shoes). The scope and mount ...
A rail system mounted on top of a SIG SG 550 A dovetail rail on a rifle receiver for mounting a sight. A rail integration system (RIS; also called a rail accessory system (RAS), rail interface system, rail system, mount, base, gun rail, or simply a rail [1]) is a generic term for any standardized attachment system for mounting firearm accessories via bar-like straight brackets (i.e. "rails ...
The most commonly encountered mounting systems are the 3 ⁄ 8 inch (9.5 mm) and the 11 mm dovetail rails (sometimes called "tip-off mounts") commonly found on rimfires and air guns, the Weaver rails, the mil-spec MIL-STD-1913 Picatinny rail (STANAG 2324), and the NATO Accessory Rail (STANAG 4694). Ruger uses a proprietary scope base system ...
Three Weaver rail mounts are present on the G22: The top handle scope mount (which also has an integrated movable six-setting rear sight) a small mount just below the muzzle intended for a Walther-produced laser sight, and a longer mount under the forearm for bipods, flashlights, etc. [3]
The receiver has integral 11 mm dovetail rail (sometimes called "tip-off" scope mounts), as well as pre-drilled and tapped mount points that will accommodate an optional Weaver-style scope base. The "tip-off" mounts are suitable only for small, light scopes for air rifle or rimfire use. For heavier scopes, the Weaver base is recommended rather ...