Search results
Results From The WOW.Com Content Network
Two points on a fuselage at waterline 100/fuselage station 93 and waterline 101/fuselage station 276. Lofting coordinates are used for aircraft body measurements. The system derives from the one that was used in the shipbuilding lofting process, with longitudinal axis labeled as "stations" (usually fuselage stations, frame stations, FS), transverse axis as "buttocks lines" (or butt lines, BL ...
The move compromised the aircraft's balance to the point that control of the aircraft was lost. [6] In July 2013, a de Havilland Canada DHC-3 Otter departed Soldotna, Alaska, stalled after rotation and crashed 2,300 ft (700 m) away from its brake-release point as it was overloaded by 418 lb (190 kg) and its CG was well aft of the rear limit ...
For a tailless aircraft, the neutral point coincides with the aerodynamic center, and so for such aircraft to have longitudinal static stability, the center of gravity must lie ahead of the aerodynamic center. [13] For missiles with symmetric airfoils, the neutral point and the center of pressure are coincident and the term neutral point is not ...
Static wicks on the winglet and aileron of an EasyJet Airbus A319-100. Static wicks, also called static dischargers or static discharge wicks, are devices used to remove static electricity from aircraft in flight. They take the form of small sticks pointing backwards from the wings, and are fitted on almost all civilian aircraft. [1]
In February 1976, work commenced to automate the methods contained in the USAF Stability and Control DATCOM, specifically those contained in sections 4, 5, 6 and 7.The work was performed by the McDonnell Douglas Corporation under contract with the United States Air Force in conjunction with engineers at the Air Force Flight Dynamics Laboratory in Wright-Patterson Air Force Base.
It does this by giving an accurate measurement of the ambient atmospheric pressure (static pressure) well clear of the aircraft's fuselage. The trailing cone system trails at least one fuselage length behind the aircraft (SpaceAge Control) via a high-strength pressure tube. Static pressure is measured forward of the cone by several static ports.
A Boeing 737 uses an adjustable stabilizer, moved by a jackscrew, to provide the required pitch trim forces. Generic stabilizer illustrated. A horizontal stabilizer is used to maintain the aircraft in longitudinal balance, or trim: [3] it exerts a vertical force at a distance so the summation of pitch moments about the center of gravity is zero. [4]
The static pressure is obtained through a static port. The static port is most often a flush-mounted hole on the fuselage of an aircraft, and is located where it can access the air flow in a relatively undisturbed area. [1] Some aircraft may have a single static port, while others may have more than one.