Ads
related to: flying distance and time calculator
Search results
Results From The WOW.Com Content Network
In commercial aviation, this means the time from pushing back at the departure gate to arriving at the destination gate. [2] Flight time is measured in hours and minutes as it is independent of geographic distance travelled. Flight time can be affected by many things such as wind, traffic, taxiing time, and aircraft used. [3]
The airplane's Pilot Operating Handbook has a table of fuel burned, time, and distance to reach a given altitude from sea level. To calculate the values for airport at 900 m (3,000 ft), you subtract the values for sea level to 900 m (3,000 ft) from the sea level to cruise altitude. [1]
One can also use the 1 in 60 rule to approximate distance from a VOR, by flying 90 degrees to a radial and timing how long it takes to fly 10 degrees (the limit of the course deviation indicator). The time in seconds divided by 10 is roughly equal to the time in minutes from the station, at the current ground speed.
[1] [2] For example, a descent from flight level 350 would require approximately 35x3=105 nautical miles. This would have to be adjusted for headwind or tailwind, [1] and also to allow for deceleration time. Alternatively, David P. Davies gives the rule as 300 feet of descent required for each nautical mile of distance. [3]: 176
The top of descent is usually calculated by an on-board flight management system, and is designed to provide the most economical descent to approach altitude, or to meet some other objective (fastest descent, greatest range, etc.). The top of descent may be calculated manually as long as distance, air speed, and
The maximal total range is the maximum distance an aircraft can fly between takeoff and landing. Powered aircraft range is limited by the aviation fuel energy storage capacity (chemical or electrical) considering both weight and volume limits. [ 1 ]