Search results
Results From The WOW.Com Content Network
Device configuration overlay (DCO) is a hidden area on many of today's hard disk drives (HDDs). Usually when information is stored in either the DCO or host protected area (HPA), it is not accessible by the BIOS (or UEFI), OS, or the user.
The HPA is useful only if other software or firmware (e.g. BIOS or UEFI) is able to use it. Software and firmware that are able to use the HPA are referred to as 'HPA aware'. The ATA command that these entities use is called READ NATIVE MAX ADDRESS. This command accesses a register that contains the true size of the hard drive.
An mSATA SSD on top of a 2.5-inch SATA drive. Serial ATA (SATA). The SATA data cable has one data pair for differential transmission of data to the device, and one pair for differential receiving from the device, just like EIA-422. That requires that data be transmitted serially.
BIOS: Phoenix BIOS. Memory: 4 GB maximum, 2 slots DDR2, 1.8 volt unbuffered, asymmetric or interleaved operation supported. Storage: 1 internal SATA drive bay, accepts 2.5 inch hard disk drives and solid state drives; Optical Drive: LightScribe SuperMulti 8X DVD±RW and 24X CD-RW Combo Drive with Double Layer Support
When booting in a true UEFI environment the Option ROM is not used as a SataDriver with the RST version takes over. In BIOS mode the legacy/BIOS booting is under CSMCORE. In true UEFI mode the RST is controlled under SataDriver / RstVmdDriver in BIOS. The Intel RAID ROM is the firmware in the motherboard BIOS that is used to create the RAID array.
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T. or SMART) is a monitoring system included in computer hard disk drives (HDDs) and solid-state drives (SSDs). [3] Its primary function is to detect and report various indicators of drive reliability, or how long a drive can function while anticipating imminent hardware failures. [4] [5]
A solution was not to use primary partitions on such hard disks. In Windows NT and OS/2, the operating system uses the aforementioned algorithm to automatically assign letters to floppy disk drives, optical disc drives, the boot disk, and other recognized volumes that are not otherwise created by an administrator within the operating system ...
The ATA standard is supported by both parallel (IDE, PATA) and serial (SATA) ATA hardware. A drawback of the original ATA TRIM command is that it was defined as a non-queueable command and therefore could not easily be mixed with a normal workload of queued read and write operations. SATA 3.1 introduced a queued TRIM command to remedy this. [70]