Ads
related to: throttling valve vs expansion kit diagram for generator parts book
Search results
Results From The WOW.Com Content Network
The liquid stream from the gas–liquid separator flows through a valve and undergoes a throttling expansion from an absolute pressure of 62 bar to 21 bar (6.2 to 2.1 MPa), which is an isenthalpic process (i.e., a constant-enthalpy process) that results in lowering the temperature of the stream from about −51 °C to about −81 °C as the ...
The pressure drop has to be maintained by the HMU if the pilot's throttle valve is to control the fuel flow. The fuel must be reduced with altitude to maintain the same a/f ratio as the lower ambient pressure means less weight of air entering the engine (early engine controls used a Barostat or Barometric Pressure Control depending on the type ...
A hydrogen turboexpander-generator or generator-loaded expander for hydrogen gas is an axial flow turbine or radial expander for energy recovery through which a high pressure hydrogen gas is expanded to produce work used to drive an electrical generator. It replaces the control valve or regulator where the pressure drops to the appropriate ...
The valves were quick acting, which reduced the amount of throttling of the steam and resulted in faster response. Instead of operating a throttling valve, the governor was used to adjust the valve timing to give a variable steam cut-off. The variable cut-off was responsible for a major portion of the efficiency increase of the Corliss engine. [19]
A supercritical steam generator is a type of boiler that operates at supercritical pressure and temperature, frequently used in the production of electric power. In contrast to a subcritical boiler in which steam bubbles form, a supercritical steam generator operates above the critical pressure – 22 megapascals (3,200 psi ) and temperature ...
The devices shown are on steam engines. Power is supplied to the governor from the engine's output shaft by a belt or chain connected to the lower belt wheel. The governor is connected to a throttle valve that regulates the flow of working fluid (steam) supplying the prime mover. As the speed of the prime mover increases, the central spindle of ...
The throttling process is a good example of an isoenthalpic process in which significant changes in pressure and temperature can occur to the fluid, and yet the net sum the associated terms in the energy balance is null, thus rendering the transformation isoenthalpic. The lifting of a relief (or safety) valve on a pressure vessel is an example ...
An expansion valve is a secondary valve within a steam engine. They represent an intermediate step between steam engines with non-expansive working and later valve gears that could provide for expansion by controlling the motion of a single valve. Expansion valves were used for stationary engines and marine engines. [1]