Ads
related to: 245/70r17 in inches width
Search results
Results From The WOW.Com Content Network
Off-roading tires may use a different measurement scheme: Tread width × Outside diameter, followed by wheel size (all in inches) – for example 31×10.50R15 (787 mm × 267 mm R380 in metric designation). The size of the wheel, however, is denoted as 8.5 in × 20.0 in (220 mm × 510 mm).
As an example, if a tire size has two sets of numbers (6-12, 5.00-15, 11.2-24), then the first number (5.00-15) is the approximate width in inches, and the second number (5.00-15) is the rim diameter in inches. If a tire size has three sets of numbers (15x6.00-6, 26x12.00-12, 31x15.50-15), then the first number (26x12.00-12) is the approximate ...
The inner width of the rim on which the tire is mounted should be about 65% of the tire's nominal section width for tires smaller than 30 mm and 55% for those larger. The section height of a tire is usually identical to its section width (for tires less than 28 mm, 2.5 mm have to be added to the width to get the height).
The dominant European size for die-cast ship models, most comprehensive range. 1:1200: 0.01 0.254 mm: Ship models: A British and American size for ship and harbour models. Airfix used to produce in this scale. 1:1000: 0.305 mm This is a scale used in Germany for pre-finished airliner models. Herpa and Hogan Wings produces several models in this ...
In 2010, the front tyres were narrowed from 270 mm (11 in) to 245 mm (9.6 in), in order to improve the balance of grip between the front and rear. [20] In 2011, with the sole tyre supplier having been changed from Bridgestone to Pirelli, [ 21 ] the rules were the same as the 2010 season rules concerning the tyres.
Rack with sample component sizes including an A/V half-rack unit. A rack unit (abbreviated U or RU) is a unit of measure defined as 1 + 3 ⁄ 4 inches (44.45 mm). [1] [2] It is most frequently used as a measurement of the overall height of 19-inch and 23-inch rack frames, as well as the height of equipment that mounts in these frames, whereby the height of the frame or equipment is expressed ...