Ads
related to: 6 speed cassette hub
Search results
Results From The WOW.Com Content Network
The width of early Shimano 6- and 7-speed cassettes was 36 mm, and early 8-speed 40 mm wide. Shimano then changed again and standardised 8-11 speed cassettes on 41.5 mm and second generation 7-speed to 38 mm. The widening of the sprocket carrier on the cassette hubs to 41.5 mm resulted in a decrease in the distance between the hub flanges.
Before epicyclic gears were used in bicycle hubs, they were used on tricycles. Patents for epicyclic hubs date from the mid-1880s. [5] [6] The first patent for a compact epicyclic hub gear was granted in 1895 to the American machinist Seward Thomas Johnson of Noblesville, Indiana, U.S.A. [7] This was a 2-speed but was not commercially successful.
They can be used individually, as an external derailleur or an internal hub gear, or in combinations such as the SRAM Dual Drive, which uses a standard 8 or 9-speed cassette mounted on a three-speed internally geared hub, offering a similar gear range as a bicycle with a cassette and triple chainrings. Derailleur gears. Cogset; Crankset; Hub gear
Hub dynamo: a generator inside one of the hubs for powering lights or other accessories; Hub gear: a gearbox mounted inside the hub, 3-speed is common, 5, 7 are available ("Sturmey-Archer"), Enviolo makes a CVT, and Rohloff makes a 14-speed hub. Cable operated by one or two cables; Indicator: a turn signal
Hyperglide or HG: Fits 7, 8, 9 and 10-speed cassette with down to 11-teeth (11T) sprockets, and is a very common freehub. Hyperglide 11 or HG-11: Fits 11 speed and 12 speed cassettes with down to 11T sprocket, and is wider than the original Hyperglide.
The individual sprockets on a Hyperglide cassette or freewheel are designed specifically to work with their neighbours. [3] For example, the 18-tooth sprocket on a wide-range cassette (such as one for a mountain bike) will have a different ramp pattern than the 18-tooth sprocket on a narrow-range cassette, because the number of teeth on the neighbouring sprocket requires a different ramp ...