Search results
Results From The WOW.Com Content Network
This engine featured a conventional one piece cylinder head, and the distributor was moved to the side of the block. The number of main bearings was increased to four. Like the Pontiac Straight-8 engine it also featured full-pressure oiling and insert type precision main and rod bearings. These two latter features greatly increased longevity ...
One of the key upgrades were the 6x4 heads. The standard head seen on an L78 400 Pontiac was the low compression 6x8 head, while the 6x4 head seen on the W72 had hardened valve seats for a higher RPM operating range, improved air flow, and higher compression. These heads can be distinguished from 6x8 heads through a small stamped "4" on the top ...
The location that Oakland inhabited was the original site of Cartercar when GM bought the company in 1909 by William Durant. [1] The plant ceased production of full-size Pontiacs after the 1980 model year but continued to build mid-size Pontiacs ('81-82 Grand Prix, '81 LeMans, '82 Bonneville G) until being idled on August 6, 1982. [2]
A Silver streak 8 in a 1949 Pontiac Streamliner - note the large intake silencer leading to an oil-bath air cleaner on the left side of the engine. The Pontiac straight-8 engine is an inline eight-cylinder automobile engine produced by Pontiac from 1933 to 1954. Introduced in the fall of 1932 for the 1933 models, it was Pontiac's most powerful ...
The Iron Duke engine (also called 151, 2500, Pontiac 2.5, and Tech IV) is a 151 cu in (2.5 L) straight-4 piston engine built by the Pontiac Motor Division of General Motors from 1977 until 1993. Originally developed as Pontiac's new economy car engine, it was used in a wide variety of vehicles across GM's lineup in the 1980s as well as supplied ...
Pontiac East Assembly (also known as Pontiac Assembly Center and GMC Truck & Coach Division Plant 6) was a General Motors manufacturing facility located in Pontiac, Michigan. The manufacturing complex at 2100 South Opdyke Road occupied a rectangular 162-acre site directly east of the GM Pontiac Centerpoint Complex. [ 1 ]
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
The Trophy 4 engine is a short-stroke, 45-degree inclined [4] inline four created from the right bank of the 389 V8 for the debut of the Tempest in 1961. Its 194.43 cu in (3.2 L) displacement is precisely half of the 389, with an identical bore and stroke of 4 + 1 ⁄ 16 in × 3 + 3 ⁄ 4 in (103.2 mm × 95.3 mm).