Ads
related to: multiband vertical ham radio antenna
Search results
Results From The WOW.Com Content Network
Inverted vee antennas are horizontally polarized and have a similar pattern compared to a traditional horizontal dipole. Typical amateur radio inverted vee installed on roof. This multiband antenna allows transmissions on the 40/20/15/10 meter bands. Center point is held up with masting and ends are secured to roof. Two VHF verticals are also ...
Radio amateurs can build the Hexbeam as a multi-band antenna to cover different frequency ranges. Popular combinations cover 20m, 15m and 10m (3 band) and 20m, 17m, 15m, 12m and 10m (5-band) ham radio bands. Hexbeams can also be built for the 40m and 30m bands. The antenna elements for the lowest frequency band are located at the exterior of ...
The HB9XBG antenna is a vertical dipole antenna for short wave radio amateurs. It was developed by the Swiss radio amateur Walter Kägi, whose call sign HB9XBG is also the designation of the antenna. [1] During the test phase in 2020, HB9XBG built two vertical dipoles – one for the 20-metre amateur radio band and another for the 40-metre band.
The category of simple antennas consists of dipoles, monopoles, and loop antennas. Nearly all can be made with a single segment of wire (ignoring the break made in the wire for the feedline connection). [citation needed] Dipoles and monopoles called linear antennas (or straight wire antennas) since their radiating parts lie along a single ...
The discone antenna has a useful frequency range of at least 10 to 1. [2] [3] When employed as a transmitting antenna, a properly constructed discone is just as efficient as an antenna designed for a more limited frequency range. The extra bandwidth comes from the controlled taper and large termination radius of the cone.
The J-pole antenna is an end-fed omnidirectional half-wave antenna that is matched to the feedline by a shorted quarter-wave parallel transmission line stub. [5] [1] [6] For a transmitting antenna to operate efficiently, absorbing all the power provided by its feedline, the antenna must be impedance matched to the line; it must have a resistance equal to the feedline's characteristic impedance.