Ads
related to: adjusting natural gas pressure regulator vent
Search results
Results From The WOW.Com Content Network
Diagram symbols for pressure reduction and back pressure regulators. The conceptual difference is mainly in which side the feedback is taken from. A pressure regulator is a valve that controls the pressure of a fluid to a desired value, using negative feedback from the controlled pressure. Regulators are used for gases and liquids, and can be ...
The exhaust diaphragm is exposed to the chamber pressure on one side, and exhaled gas pressure in the oro-nasal mask on the other side. This is a form of back-pressure regulator. The supply of gas for inhalation is through a demand valve which works on the same principles as a regular diving demand valve second stage.
A gas pipeline compressor station. Gas is vented by design from the seals of some gas compressor equipment. In gas fields, acquiring non-associated petroleum gas (i.e. another form of raw natural gas) is the primary financial objective, and very little is unwanted compared to the gas produced in oil fields or coal mines.
A diving regulator or underwater diving regulator is a pressure regulator that controls the pressure of breathing gas for underwater diving.The most commonly recognised application is to reduce pressurized breathing gas to ambient pressure and deliver it to the diver, but there are also other types of gas pressure regulator used for diving applications.
There are different designs of the self-balancing mechanism that largely determine the technical characteristics of CAV regulators: Self-balancing mechanism based on a silicone adjustment diaphragm that changes its volume depending on the air pressure in the duct, thereby increasing or decreasing the air flow area.
ISO 11439: Gas cylinders — High-pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles [28] ISO 15500-5: Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve [29] [30] US DOT CFR Title 49, part 178, Subpart C — Specification for Cylinders [31]