Ads
related to: aircraft lift devices and supplies near metemu.com has been visited by 1M+ users in the past month
Search results
Results From The WOW.Com Content Network
High-lift devices compensate for this design trade-off by adding lift at takeoff and landing, reducing the speed and distance required to safely land the aircraft, and allowing the use of a more efficient wing in flight. The high-lift devices on the Boeing 747-400, for example, increase the wing area by 21% and increase the lift generated by 90 ...
Droop flaps function with other high-lift devices on an aircraft to increase the camber of the wing and reduce the stalling speed.On the Airbus A380, the first stage of lift device selection deploys the droop flaps (called droop noses by Airbus) and leading-edge slats located further out on the wing; with the main flaps starting to extend when the second stage is selected.
Slats are high-lift devices typically used on aircraft intended to operate within a wide range of speeds. Trailing-edge flap systems running along the trailing edge of the wing are common on all aircraft. The position of the leading-edge slats on an airliner (Airbus A310-300). In this picture, the slats are drooped.
A leading-edge cuff is a fixed aerodynamic wing device employed on fixed-wing aircraft to improve the stall and spin characteristics. Cuffs may be either factory-designed or an after-market add-on modification. [1] A leading-edge cuff is a wing leading-edge modification, usually a lightly drooped outboard leading-edge extension. In most cases ...
This allows the aircraft to generate the required lift at a lower speed, reducing the minimum speed (known as stall speed) at which the aircraft will safely maintain flight. For most aircraft configurations, a useful side effect of flap deployment is a decrease in aircraft pitch angle which lowers the nose thereby improving the pilot's view of ...
Ball-Bartoe Jetwing used for blown-wing research. Note the "augmentor", intended to direct the discharged airflow over the wingWilliams [8] states some flap blowing tests were done at the Royal Aircraft Establishment before the Second World War, and that extensive tests were done during the war in Germany including flight tests with Arado Ar 232, Dornier Do 24 and Messerschmitt Bf 109 aircraft.