Ad
related to: spectrophotometer for textile color matching test questions template sample
Search results
Results From The WOW.Com Content Network
Color matching in the textile dyeing industry is essential. In this branch, three types of metamerism are commonly encountered: illuminant metamerism, observer metamerism and field-size metamerism. [citation needed] Due to the wide range of different illuminants in modern life, textile color matching is difficult to ensure. Metamerism on large ...
In Holmgren's wool test, the patient is asked to match coloured skeins of yarn to the samples in the box. [6] [7] At first, the patient is asked to select from the 40 skeins, 10 skeins that best match the light green master A. [2] From the remaining 30 skeins, the patient is then asked to select the 5 skeins that best match the red master C. [2] Lastly, the patient is asked to select 5 skeins ...
A standard bluewool textile fading test card is also placed in the same light conditions as the sample under test. The amount of fading of the sample is then assessed by comparison to the original colour. A rating between 0 and 8 is awarded by identifying which one of the eight strips on the bluewool standard card has faded to the same extent ...
The patient had to match one piece of wool to the samples in the box in this colour blindness test. There are light and dark shades to confuse the patient. This helped detect problems. The numbers on the pieces of wool were codes. The doctor used them to determine what type colour blindness the patient had.
A spectrophotometer measures the spectral reflectance, transmittance, or relative irradiance of a color sample. [5] [6] A spectrocolorimeter is a spectrophotometer that can calculate tristimulus values. A densitometer measures the degree of light passing through or reflected by a subject. [4]
The transmission of a reference substance is set as a baseline (datum) value, so the transmission of all other substances is recorded relative to the initial "zeroed" substance. The spectrophotometer then converts the transmission ratio into 'absorbency', the concentration of specific components of the test sample relative to the initial substance.
Before testing a sample, the Spectronic 20 is calibrated using a blank solution, which is the pure solvent that is used in the experimental sample. It is typically water or an organic solvent. In this calibration, the transmittance is set at 100% using the calibration knob of the instrument (the amplifier control knob in the figure at right).
Anomaloscope using a Rayleigh Match. An anomaloscope requires a subject to make a color match between a mixture color and a test color. The test color is a single spectral color, for which the subject can adjust the brightness. The mixture color combines two spectral colors, for which the subject can adjust the proportion, thereby changing the hue.