Ad
related to: capacitor sizes chart
Search results
Results From The WOW.Com Content Network
Capacitors for AC applications are primarily film capacitors, metallized paper capacitors, ceramic capacitors and bipolar electrolytic capacitors. The rated AC load for an AC capacitor is the maximum sinusoidal effective AC current (rms) which may be applied continuously to a capacitor within the specified temperature range.
Electronic color code – color-code used to indicate the values of axial electronic components, such as resistors, capacitors, inductors, diodes (also see IEC 60062) Geometric progression; Preferred number; Renard series – used for current rating of electric fuses
The size of commercially available capacitors ranges from around 0.1 pF to 5 000 F (5 kF) supercapacitors. Parasitic capacitance in high-performance integrated circuits can be measured in femtofarads (1 fF = 0.001 pF = 10 −15 F), while high-performance test equipment can detect changes in capacitance on the order of tens of attofarads (1 aF ...
Capacitors in a parallel configuration each have the same applied voltage. Their capacitances add up. Charge is apportioned among them by size. Using the schematic diagram to visualize parallel plates, it is apparent that each capacitor contributes to the total surface area.
Tantalum capacitors in different styles: axial, radial and SMD-chip versions (size comparison with a match) 10 μF 30 VDC-rated tantalum capacitors, solid electrolyte epoxy-dipped style. A tantalum electrolytic capacitor is an electrolytic capacitor, a passive component of electronic circuits.
Aluminium electrolytic capacitors form the bulk of the electrolytic capacitors used in electronics because of the large diversity of sizes and the inexpensive production. Tantalum electrolytic capacitors, usually used in the SMD (surface-mount device) version, have a higher specific capacitance than the aluminium electrolytic capacitors and are ...
A typical ceramic through-hole capacitor. A ceramic capacitor is a fixed-value capacitor where the ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications.
The codes given in the chart below usually tell the length and width of the components in tenths of millimeters or hundredths of inches. For example, a metric 2520 component is 2.5 mm by 2.0 mm which corresponds roughly to 0.10 inches by 0.08 inches (hence, imperial size is 1008).