Ads
related to: bosch injection pump identification code search by model
Search results
Results From The WOW.Com Content Network
Pumpe Düse (PD) diesel direct injection: one underfloor electric fuel lift pump, two camshaft-driven low-pressure fuel pumps supplying common fuel rails (one per cylinder bank), ten camshaft-actuated UI-P1 2,050 bar (29,730 psi) Unit Injectors with solenoid-actuated nozzles, 72° injection interval; two Bosch EDC16 32-bit electronic engine ...
The valve zone is not flat anymore but slightly hemispheric. The engine block is equipped with oil squirters (with pressure valve) for better cooling of the pistons. The pistons are modified on the skirt zone to not interfere with the oil squirters during the strokes. The injection pump (bosch VE) is adapted to the turbo system.
Bosch 2,000 bar (29,010 psi) common rail (CR) (one rail per cylinder bank) direct injection: with two chain-driven high-pressure fuel pumps, fuel cooler for return line, twelve combustion chamber-sited eight-hole (0.12 mm (0.0047 in)) piezo injectors with multi-pulse injection (up to five injection operations per piston cycle, including pre ...
It uses a Bosch electronically controlled inline injection pump (ERE) except in the W124 where it uses a Bosch mechanically governed inline injection pump (Bosch M pump with RSF governor). It is related to the straight-4 2.0 and 2.2 litre OM604 and the straight-6 3.0 litre OM606 engines.
It uses a Bosch electronically controlled inline injection pump (ERE) except in the W124 where it uses a Bosch mechanically governed inline injection pump (Bosch M pump with RSF governor). It is related to the straight-4 2.0 and 2.2 litre OM604 and the straight-5 2.5 litre OM605 engine families of the same era.
The 4JB1 is a 4-cylinder naturally aspirated watercooled in-line direct injection and also a high revving high output diesel engine with its VE rotary injection pump. Horse power is 90ps industrial version. torque is 135 lb.-ft. at 2000 rpm . while the light version 4JB1 uses gear type oil pump and Bosch "A" Type mechanical injection.
Both engines also featured either a Bosch or a Lucas mechanical fuel pump and injectors. The engine version with the Bosch pump is known to have been run with vegetable oil. The original XUD9 engine is known as the "square port" engine, as its cylinder head has square exhaust ports. Later (and noticeably improved) XUD9A engines have oval ports.
The fuel system uses a Bosch mechanical distributor-type (Bosch VE type) injection pump which feeds indirect fuel injection into a remote whirl pre-combustion chamber. The cooling system is composed of a timing belt driven water pump, an 87 °C thermostat in the engine block itself.