Search results
Results From The WOW.Com Content Network
I finally found some H4350. I'd much appreciate you all sharing load data for H4350. I have a Savage Stealth 10BA, 6.5 Creedmoor I'm using Nosler brass, CCI primer, Hornaday 140 gr ELD M. OAL is 2.862 in my rifle. I currently have been using H100V @ 2647 fps 40g with the above and have been getting about 0.75" group at 100 yds with my shaky hold.
With a 20” Tikka 6.5 Creedmoor and Hornady brass loaded with a 160 gr Hornady RN over 10.5 gr of Trail Boss and a WLR primer at 2.75” OAL, I got 1030 FPS. That’s the load I’m going with as. 11.5 gr was 1114 fps, 11.0 gr was 1075 fps, and 10.0 gr was 966 fps. Good & stable in a 1:8 twist 20”. /David.
Peterson 6.5CM SRP. Berger 140gr Hybrid. 40.3 (low) or 41.2 (high) grains H4350, 2727 / 2796 fps, ES 5 (10 shots), 24 (5 shots) respectively. CCI 450 (small rifle magnum) Previously, I loaded Hornady and Prime (Norma) brass. Interestingly, I found low and high nodes at exactly the same powder weights. Hornady 6.5CM.
According to Hornadys Load data, 46.8 grains will give me a velocity of 2950fps, with a 24 inch barrel, mine is 22", so I expect a bit less in the Velocity. Once I am able to get to the range and test these groups I will posts pics and update this post. Last edited: Mar 29, 2024.
6.5 Creedmoor Vortex Razor AMG ARC 30 MOA Mount Atlas Bipod The rest of the load data is included on each target attached, but basics are as follows: Hornady Brass - once fired Reloader 17 CCI BR-2 Full length sized Trimmed to 1.915" Seated to .020" from lands Length to Ogive: 2.225" Overall Length: about 2.858"
328. St. Augustine, FL. Feb 10, 2019. #2. Feb 10, 2019. #2. I shoot 41.4g of H4350 and get 2600-2615 in my 18". I would have never tried the bullet, but a guy let me shoot his Black Hills 143s and they grouped very good in my rifle. I pretty much just replicated the BH load as close as I could.
Nov 12, 2022. #10. I'm using 43.5gr of N555 with Lapua SRP (CCI #400), Lapua Scenar-L 136gr, COAL 2.854, with great results. I've shots multiple 0.7moa group at 300 meters with a Tikka T3x CTR, factory barrel. Basically, I love the powder, it's very clean and got greats results at very varying temperatures.
Jan 1, 2022. #38. I can confirm 42.5 gr H4350 in x1 Hornady brass with Fed 210Ms was safe and fast in my 28" 5R 1-8 6.5 cm w/ the 130 eldms at 2.8" oal. 2929 fps avg and SD 9.8 for x8, saving the rest for Jan match, grouping was open @ .75 moa, but most of that was me in the cold in a hurry.
0. Jul 14, 2020. #1. Good afternoon. I am new to snipers hide and I wanted to share a successful 6.5 blend that has given me consistent results. I have chosen to use the Hornady 143gr .264 (6.5mm) ELD-X projectile. I switched to the ELD-X when the A-Max line was being discontinued due to melting tip issues at prolonged supersonic speed.
I have burned through several #8 jugs of RL16 in my 6.5cm and I'm running 140gr at 3000fps. I haven't not noticed a difference. Throat isn't showing any signs of advanced wear either with a borescope. But not to say I won't be needing to replace it soon. Wow, that is cooking! I run 140's at 2835 with H4350.