Search results
Results From The WOW.Com Content Network
In flat sawing, the log is passed through the blade cutting off plank after plank without changing the orientation of the blade or log. The resulting planks have different growth ring orientations when viewed from the end. The relative angle that form the rings and the surface go from almost zero degrees in the external planks to almost ninety ...
Log splitting is the act of splitting firewood from logs that have been pre-cut into sections (rounds, bolts, billets [3]). This can be done by hand, using an axe or maul, or by using a mechanical log splitter. [4] When splitting a log by hand, it is best to aim for the cracks (called checks), if there are any visible. [5]
A firewood processor is a machine designed to cut and split firewood with minimal manual handling of the logs. There are typically four main parts of the machine, each dedicated to a separate function. Processing begins with a log pile – a pile of logs that have been de-limbed and cut to an appropriate length, generally 12–20 feet (3.7–6. ...
A sawmill (saw mill, saw-mill) or lumber mill is a facility where logs are cut into lumber. Modern sawmills use a motorized saw to cut logs lengthwise to make long pieces, and crosswise to length depending on standard or custom sizes (dimensional lumber). The "portable" sawmill is simple to operate. The log lies flat on a steel bed, and the ...
A plank is timber that is flat, elongated, and rectangular with parallel faces that are higher and longer than wide. [1] Used primarily in carpentry, planks are critical in the construction of ships, houses, bridges, and many other structures. [2] Planks also serve as supports to form shelves and tables. Cutting a log into planks in a sawmill
A Eucalyptus being felled using springboards, c. 1884–1917, Australia McGiffert Log Loader in East Texas, US, c. 1907 Lumber under snow in Montgomery, Colorado, 1880s. Logging is the process of cutting, processing, and moving trees to a location for transport.
Lumber produced by flat sawing from a log. Plank A has been cut from the middle, and is as wide as the original log. Plank B has been cut closer to the side, and shows slash grain. Flat sawing, flitch sawing or plain sawing is a woodworking process that produces flat-cut or plain-cut boards of lumber. [1]
Cut-to-length logging (CTL) is a mechanized harvesting system in which trees are delimbed and cut to length directly at the stump. [1] CTL is typically a two-man, two-machine operation with a harvester felling, delimbing, and bucking trees and a forwarder transporting the logs from the felling to a landing area close to a road accessible by ...